From: tdiaz-a(in_a_circle)-apple2-dotsero-org (Tony Diaz) Newsgroups: comp.sys.apple2,comp.answers,news.answers Approved: news-answers-request@MIT.EDU Followup-To: comp.sys.apple2 Subject: Apple II & Flopticals Frequently Asked Questions (FAQ)
Archive-name: apple2/cdrom Posting-Frequency: monthly Last-modified: August 21 2007 Version: 1.1 URL: http://apple2.info/wiki/index.php?title=Floptical
- 1 Mini-FAQ (frequently asked questions): floptical and the //'s
- 1.1 Which Apple //'s can use the floptical?
- 1.2 With the //gs, you can use the floptical to read and write:
- 1.3 Which RamFAST ROM version do I need?
- 1.4 Where can I buy the latest RamFAST ROM's?
- 1.5 Which drivers do I need for the Apple SCSI cards?
- 1.6 Where can I get Richard Bennett's freeware drivers?
Mini-FAQ (frequently asked questions): floptical and the //'s
Copyright (c) 1993-96, by Frank M. Lin, Nathan Mates All rights reserved.
Copyright (c) 1998-2007 by Tony Diaz (email: tdiaz-a(in_a_circle)-apple2-dotsero-org), all rights reserved. This document can be freely copied so long as 1) it is not sold, 2) any sections reposted elsewhere from it are credited back to this FAQ with the FAQ's copyright info and official WWW location (URL: http://apple2.info/wiki/index.php?title=Applesoft_BASIC) left in place.
This FAQ may not be sold, bundled on disks or CD-ROMs, reprinted in magazines, books, periodicals, or the like without prior consent from the maintainer, Tony Diaz. Exceptions are explicitly granted for Juiced.GS and _The_Lamp. Email me for permission otherwise.
Big thanks to Nathan Mates, the previous maintainer of this comp.sys.apple2 FAQ, for allowing it to live on after his departure and anyone who took up that mantle before him.
Which Apple //'s can use the floptical?
With the Apple //gs, you can use the Apple SCSI card rev. C, Apple High-Speed SCSI card, or RamFAST SCSI card.
With the //gs, you can use the floptical to read and write:
720k MFM formated disks (usually MS-DOS) 1440k MFM formatted disks (usually MS-DOS) ~21mb VHD disks (like a SCSI device)
With the //e, you can only use RamFAST. I believe you can only use it as a 21mb drive. A floptical will be a decent main drive, or a pretty good backup media.
Which RamFAST ROM version do I need?
You need 3.0k or later to have floptical support, but some of them have bugs with the floptical support. So be sure to get the best version, 3.0.1e ROM.
3.0.1e fixes some floptical bugs, and also allows the mounting of ISO-9660 (high-sierra format) CD-ROMs.
Where can I buy the latest RamFAST ROM's?
Your best bet is to order from Sequential Systems directly at:
Sequential Systems, Inc. 1200 Diamond Circle Lafayette, Colorado 80026
sales: (800) 759-4549 customer service: (800) 999-1717 Be sure to specify for rev. C or rev D. RamFAST, and if you have a //e or //gs.
Which drivers do I need for the Apple SCSI cards?
For rev. C or High-Speed, you can use Richard Bennett's freeware drivers. If you bought the floptical drive from Tulin, they also come with Tulin's drivers.
Latest version of Richard's drivers is 1.0.1.
Where can I get Richard Bennett's freeware drivers?
It is available for FTP on apple2.caltech.edu. If you have problems locating it and/or no FTP access, mail me, and I'll post to comp.binaries.apple2 or send you a binscii mail.
01-22-94 minor corrections
12-24-93 first release
Original author credits. Please note that these addresses are valid, and as Frank M. Lin has left the Apple II scene, do not contact him any more than necessary
OggNet: Capsule, user #6 @ House of Games
FutureNet: Capsule, user #9 @ Boycot BBS (#9@#8)
IRC: potty, gogo