Difference between revisions of "CSA2 Part 4" - wiki.apple2.org

Difference between revisions of "CSA2 Part 4"

Jump to: navigation, search
(New page: From: tdiaz-apple2-org (Tony Diaz) Newsgroups: comp.sys.apple2,comp.answers,news.answers Approved: news-answers-request@MIT.EDU Followup-To: comp.sys.apple2 Subject: comp.sys.apple2 Freque...)
 
Line 3: Line 3:
 
Approved: news-answers-request@MIT.EDU
 
Approved: news-answers-request@MIT.EDU
 
Followup-To: comp.sys.apple2
 
Followup-To: comp.sys.apple2
Subject: comp.sys.apple2 Frequently Asked Questions (FAQ) Part 1/4
+
Subject: comp.sys.apple2 Frequently Asked Questions (FAQ) Part 4/4
  
Archive-name: apple2/faq/part1
+
Archive-name: apple2/faq/part4
 
Posting-Frequency: monthly
 
Posting-Frequency: monthly
 
Last-modified: August 21 2007
 
Last-modified: August 21 2007
Line 11: Line 11:
 
URL: http://apple2.info/wiki/index.php?title=CSA2_FAQ
 
URL: http://apple2.info/wiki/index.php?title=CSA2_FAQ
  
The next section is the Frequently Asked Questions (FAQ) posting of
+
The next section is the Frequently Asked Questions (FAQ) posting of the comp.sys.apple2 newsgroup. Copyright (c) 2007 by Tony Diaz (email: tdiaz-at-apple2-dot-org), all rights reserved. This document can be freely copied so long as 1) it is not sold, 2) any sections reposted elsewhere from it are credited back to this FAQ with the FAQ's copyright info and official WWW location ( http://apple2.info/wiki/index.php?title=CSA2_FAQ) left in place.
the comp.sys.apple2 newsgroup. Copyright (c) 2007 by Tony Diaz
 
(email: tdiaz-at-apple2-dot-org), all rights reserved. This document
 
can be freely copied so long as 1) it is not sold, 2) any sections
 
reposted elsewhere from it are credited back to this FAQ with the
 
FAQ's copyright info and official WWW location
 
( http://apple2.info/wiki/index.php?title=CSA2_FAQ) left in place.
 
  
This may not be the latest version of this FAQ-- this is an archived
+
This may not be the latest version of this FAQ-- this is an archived copy. For that, drop by http://apple2.info/wiki/index.php?title=CSA2_FAQ
copy. For that, drop by http://apple2.info/wiki/index.php?title=CSA2_FAQ
 
  
This FAQ may not be sold, bundled on disks or CD-ROMs, reprinted in
+
This FAQ may not be sold, bundled on disks or CD-ROMs, reprinted in magazines, books, periodicals, or the like without prior consent from the maintainer, Tony Diaz. Exceptions are explicitly granted for Juiced.GS and _The_Lamp. Email me for permission otherwise.
magazines, books, periodicals, or the like without prior consent from
 
the maintainer, Tony Diaz. Exceptions are explicitly granted for
 
Juiced.GS and _The_Lamp. Email me for permission otherwise.
 
  
Big thanks to Nathan Mates, the previous maintainer of this  
+
Big thanks to Nathan Mates, the previous maintainer of this comp.sys.apple2 FAQ, for allowing it to live on after his departure and anyone who took up that mantle before him.
comp.sys.apple2 FAQ, for allowing it to live on after his departure
 
and anyone who took up that mantle before him.
 
  
 
--- Begin part 4 of 4
 
--- Begin part 4 of 4
 
                                        
 
                                        
Some Common Questions (with answers!) 8/30/97
+
= Some Common Questions =
  
  7.1 Can my Apple II connect to the Internet?
+
== Can my Apple II connect to the Internet? ==
 
+
 
  A: Short answer: yes, any 80 (maybe even 40) column Apple II with a
+
 
  serial card (and almost always a modem) can connect to an Internet
+
A: Short answer: yes, any 80 (maybe even 40) column Apple II with a serial card (and almost always a modem) can connect to an Internet Service Provider that provides a shell account. (Please note that "connect to the internet" is the better term for it; avoid the media's popularizing of metaphors related to driving or surfing.)
  Service Provider that provides a shell account. (Please note that
+
 
  "connect to the internet" is the better term for it; avoid the media's
+
Longer answer: As of 3/8/97, the only available method is to have a serial (modem or null modem) connection to another computer which can translate and run stuff on it. Most of the time, this means that you will need to find an Internet Service Provider (ISP) which supports a plain "shell" connection. (Telling them you have an Apple II will likely confuse them; just tell them that a VT-100 shell is what you want). For a list of ISPs, try
  popularizing of metaphors related to driving or surfing.)
 
 
 
  Longer answer: As of 3/8/97, the only available method is to have a
 
  serial (modem or null modem) connection to another computer which can
 
  translate and run stuff on it. Most of the time, this means that you
 
  will need to find an Internet Service Provider (ISP) which supports a
 
  plain "shell" connection. (Telling them you have an Apple II will
 
  likely confuse them; just tell them that a VT-100 shell is what you
 
  want). For a list of ISPs, try checking local newspaper
 
  advertisements, or drop by http://www.thelist.com.
 
 
 
  This will give you a straight text connection to the internet; no
 
  fancy graphics. Yes, it's a lot less eye candy, but the advantage is
 
  that files transfer faster. You can still download files, pictures,
 
  and the like, and deal with them later. Once you are signed up for a
 
  shell account, you will need to connect up, usually via modem and
 
  terminal program. 99% of shell accounts are in unix systems; you
 
  should talk to the tech support desk of wherever you get your
 
  connection from for information on how to do items such as email,
 
  usenet, and the like.
 
 
 
  If you have a GS have Seven Hills Software's Spectrum (modem
 
  communication program), they have just announced a set of addons that
 
  allow WWW browsing from an Apple II. According to their WWW press
 
  releases at http://www.sevenhills.com/applesoftware/iigs/sis/, you
 
  will need a GS with 4MB RAM (HD and accelerator recommended), Spectrum
 
  2.1, a modem, and a GEnie or
 
  
    _________________________________________________________________
 
  
  Strange problems:
+
== What are the problems with GSCII? ==
  
  8.1 How do I get out of Basic (that little "]" prompt and cursor?
+
A: GSCII is a great program, but has two subtle problems: First, it won't work correctly if you extract to a HFS disk (so extract to a ProDOS disk). Also, it won't set the size correctly on S16 files. This should only be a problem when downloading Shrinkit GS. In that case, use BINSCII. The rest of the time you will be extracting .SHK files, which don't care about extra bytes at the end.
  
  A: Type the word "BYE" and press return. For more information on
 
  Applesoft, see Nathan Mates's Applesoft FAQ at
 
  http://www.visi.com/~nathan/a2/faq/asoft.html You can also get more
 
  information on DOS 3.3/ProDOS commands at
 
  http://www.visi.com/~nathan/a2/faq/dos.html
 
  
  8.2 What are the problems with GSCII?
+
== AppleWorks won't print to my printer. What gives? ==
  
  A: GSCII is a great program, but has two subtle problems: First, it
 
  won't work correctly if you extract to a HFS disk (so extract to a
 
  ProDOS disk). Also, it won't set the size correctly on S16 files. This
 
  should only be a problem when downloading Shrinkit GS. In that case,
 
  use BINSCII. The rest of the time you will be extracting .SHK files,
 
  which don't care about extra bytes at the end.
 
  
  8.3 AppleWorks won't print to my printer. What gives?
+
A: AppleWorks will refuse to print to a slot that has a disk device. In the past, this worked well because if you try to print to a slot that has a disk controller in it, you will re-boot. But now, this can cause problems when a disk device is 'mapped' into your printer slot (due to a limitation in ProDOS, you can only have 2 drives per slot. Extra partitions on your hard drive will be re-mapped to other slots). If you have a RamFast, you can re-map the drives to different slots. Otherwise, (for AW 3.0) use this patch:
  
  A: AppleWorks will refuse to print to a slot that has a disk device.
 
  In the past, this worked well because if you try to print to a slot
 
  that has a disk controller in it, you will re-boot. But now, this can
 
  cause problems when a disk device is 'mapped' into your printer slot
 
  (due to a limitation in ProDOS, you can only have 2 drives per slot.
 
  Extra partitions on your hard drive will be re-mapped to other slots).
 
  If you have a RamFast, you can re-map the drives to different slots.
 
  Otherwise, (for AW 3.0) use this patch:
 
  
POKE 768,128: POKE 769,10
+
<code>POKE 768,128: POKE 769,10
 
BSAVE APLWORKS.SYSTEM,TSYS,A$300,L2,B$AE3
 
BSAVE APLWORKS.SYSTEM,TSYS,A$300,L2,B$AE3
 +
</code>
 +
 +
If you didn't understand that, e-mail me, or look into John Link's SuperPatch program, which includes many more patches.
  
  If you didn't understand that, e-mail me, or look into John Link's
 
  SuperPatch program, which includes many more patches.
 
  
  8.4 My GS control panel keeps resetting to the defaults and/or
+
== My GS control panel keeps resetting to the defaults and/or forgetting the date-- the battery is dead. ==
  forgetting the date-- the battery is dead.
 
  
  A: It's probably your battery. If you have a ROM 03 GS, can you just
 
  pop it out an get another. On the ROM 01, you will need a Slide-On
 
  Battery Replacement Kit from Night Owl Productions. See address in
 
  hardware & software vendors section (10.2).
 
  
  8.5 I'm getting Error XXXX or YY. What's it mean?
+
A: It's probably your battery. If you have a ROM 03 GS, can you just pop it out an get another. On the ROM 01, you will need a Slide-On Battery Replacement Kit from Night Owl Productions. See address in hardware & software vendors section (10.2).
  
  A: Some common errors and their cause:
 
  
  A larger list of all error messages, but not always the best
+
== I'm getting Error XXXX or YY. What's it mean? ==
  description of the cause is at
+
 
  http://www.visi.com/~nathan/a2/faq/gserrors.html.
+
A: Some common errors and their cause:
 +
 
 +
A larger list of all error messages, but not always the best description of the cause is at http://www.visi.com/~nathan/a2/faq/gserrors.html.
 +
 
 
ProDOS Errors:
 
ProDOS Errors:
UNABLE TO LOAD PRODOS   - You can't boot a disk unless it has ProDOS and a
+
 
                          something.SYSTEM file on it (Pre-1.9 ProDOS)
+
UNABLE TO LOAD PRODOS - You can't boot a disk unless it has ProDOS and a something.SYSTEM file on it (Pre-1.9 ProDOS)
$27   I/O Error. Possibly a bad disk?  Verify it with Prosel or Copy II Plus
+
 
$44   Path not found (You gave an invalid directory name)
+
<tab class=wikitable sep=bar>
$45   Volume not found (you didn't type in the right disk name)
+
<A2Txt>Error No. </A2Txt>| <A2Txt>Meaning</A2Txt>
$46   File not found (you didn't type a valid filename)
+
$27|I/O Error. Possibly a bad disk?  Verify it with Prosel or Copy II Plus
 +
$44|Path not found (You gave an invalid directory name)
 +
$45|Volume not found (you didn't type in the right disk name)
 +
$46|File not found (you didn't type a valid filename)
 +
</tab>
 +
 
 
GS/OS errors:
 
GS/OS errors:
0201  Out of memory
 
0911  Either your GS is overheating, or the ADB port is having problems
 
0301  Bad TransWarp
 
0308  (Also see 8021) Something has trashed critical parts of memory
 
11xx  GS/OS could not successfully load an application or program
 
8020  Either random TransWarp, or SCSI (try using different SCSI connector)
 
8021  If you get this at random times and you have a HS Apple SCSI, it's
 
      probably a version conflict. Install the SCSI drivers from your GS/OS
 
      disk, not your HS Apple SCSI disk.
 
  
  8.6 Why does my Apple II lose characters when I'm using the modem?
+
<tab class=wikitable sep=bar>
 +
<A2Txt>Error No. </A2Txt>| <A2Txt>Meaning</A2Txt>
 +
0201|Out of memory
 +
0911|Either your GS is overheating, or the ADB port is having problems
 +
0301|Bad TransWarp
 +
0308|(Also see 8021) Something has trashed critical parts of memory
 +
11xx|GS/OS could not successfully load an application or program
 +
8020|Either random TransWarp, or SCSI (try using different SCSI connector)
 +
8021|If you get this at random times and you have a HS Apple SCSI, it's
 +
|probably a version conflict. Install the SCSI drivers from your GS/OS
 +
|disk, not your HS Apple SCSI disk.
 +
</tab>
 +
 
  
  A: Check the following: 1) Your software may need interrupts enabled.
+
== Why does my Apple II lose characters when I'm using the modem? ==
  Examine DIP Switch 2-6 on your Super Serial Card. 2) If you have an
 
  unenhanced //e, you need to enhance your //e. 3) If you have a //c, it
 
  may be one of the ones that had a serial port problem. Talk to your
 
  dealer about upgrading it for 2400 baud support. Also, to use a modem
 
  faster than 9600 pretty much requires a 'Hardware Handshaking' cable,
 
  not a cheap one.
 
  
  8.7 Where do I get support for AE boards now that they are closed?
+
A: Check the following: 1) Your software may need interrupts enabled. Examine DIP Switch 2-6 on your Super Serial Card. 2) If you have an unenhanced //e, you need to enhance your //e. 3) If you have a //c, it may be one of the ones that had a serial port problem. Talk to your dealer about upgrading it for 2400 baud support. Also, to use a modem faster than 9600 pretty much requires a 'Hardware Handshaking' cable, not a cheap one.
  
  A: Bruce BABB, ex-AE bench tech, is offering support out of his home
 
  for customer support of AE's boards. He also hints that another
 
  company is opening that will sell many of the Apple II products the AE
 
  made. You can reach Bruce via Email at 76004.1575@compuserve.com
 
  
  8.8 Is there a QWK reader for the Apple //e?
+
== Where do I get support for AE boards now that they are closed? ==
  
  A: Yes, it's called 2qwk!. To use 2qwk! you must patch ProDOS to allow
+
A: Bruce BABB, ex-AE bench tech, is offering support out of his home for customer support of AE's boards. He also hints that another company is opening that will sell many of the Apple II products the AE made. You can reach Bruce via Email at 76004.1575@compuserve.com
  filenames sent by MS-DOS machines. The Apple II version is now
 
  available via ftp from ground and caltech.
 
  
  8.9 I've got a problem. How do I troubleshoot it?
+
== Is there a QWK reader for the Apple //e? ==
  
    * Asking others for help is fine, but if you do, please provide the
+
A: Yes, it's called 2qwk!. To use 2qwk! you must patch ProDOS to allow filenames sent by MS-DOS machines. The Apple II version is now available via ftp from ground and caltech.
      following information. (And the act of finding out this
 
      information may help you find the cause on your own)
 
        1. Is it reproducible? One system crash that happened out of the
 
            blue and never reoccurred is almost impossible to track down
 
            and fix.
 
        2. When did the fault appear? During boot? After a fixed amount
 
            of time? Whenever you do X in program Y?
 
        3. Any and ALL error messages reported by the system. Copy them
 
            down and repeat them exactly; saying "it gave an error" is
 
            not useful.
 
        4. How dead the system is. Does the mouse still work, but clicks
 
            do nothing? Does it do anything at all?
 
        5. System configuration. What cards in what slots, how much RAM,
 
            which SCSI controller and rom version (if applicable), what
 
            size HD, etc.
 
    * If you have just purchased a bunch of new hardware and/or
 
      software, resist the temptation to install all your new toys at
 
      once. Take it one step at a time and test everything after adding
 
      each item. (i.e. Run the diagnostics and try your old programs.)
 
    * If you have an enhanced //e, //c, IIc+, or GS, try the system
 
      self-test: hold down the Control key, the Open Apple key, and the
 
      Option (or Solid Apple) key. Then press and release Reset. Lastly,
 
      let up on the other keys. Sit back and 'Watchen Der Blinken
 
      Lighten.' If you run into a problem, please see the next section
 
      on self test errors and what they mean.
 
    * Leave the computer plugged in, but turned off when installing
 
      cards. Touch the top of power supply before and often during your
 
      work. Better yet, use a wrist strap tied to ground through a 1
 
      Megaohm resistor.
 
    * Make sure you have the required components for the program. Does
 
      it require an Enhanced //e? More RAM? A separate boot disk?
 
    * Never use your original disks. Make a backup and store the
 
      write-protected original in a safe place.
 
    * Be sure to keep your disks away from stray magnetic fields, such
 
      as those emanating from phones, monitors and speakers.
 
    * If you have an accelerator, try to disable it or take it out
 
      entirely. It may not be compatible with the new item. (This is
 
      actually rare; the one consistent thing accelerators have problems
 
      is the GS's self test)
 
    * Check all your cable connections. Do not disconnect or connect any
 
      cables with the computer on-- this includes disk/hard drives,
 
      keyboards, mice, etc.
 
    * Try pulling out other cards and disconnect your joystick. If you
 
      have a lot of cards, you might consider a Heavy-Duty Power Supply
 
      from A.E. It supplies 6 Amps instead of a measly 2.5 Amps. Test
 
      the power supply with a voltmeter while the computer is on.
 
    * Call the manufacturer to see if there is an upgrade or a fix with
 
      the program.
 
    * Most RAM cards come with a memory tester. Try running it in
 
      continuous mode for several hours, even if your RAM seems to be
 
      working.
 
    * Verify your disk(s) with Copy ][+ or the Finder to see if you have
 
      any bad blocks. A better choice is ProSEL, which provides a
 
      comprensive set of disk verification and fixing errors.
 
    * On a GS, check your control panel (control-open-apple-escape)
 
      settings: What is the startup slot set to? Is the slot set to
 
      "Your Card"? Check your RAM disk setting. Is it taking up all your
 
      memory? Try setting the speed to normal if it's a non-GS program.
 
    * On a GS, try take out or disable your INITS, CDAs, NDAs, and
 
      CDEVS. (With System 6, just hold down the shift key while
 
      booting). If the system is fine when shiftbooted, then there is
 
      probably a conflict between some of them. Try manually disabling a
 
      few at a time, and seeing if the problem disappears. You can
 
      narrow down a problem to an init or few that way.
 
    * If you have a hard disk, try booting from a System Disk and/or
 
      reinstalling the latest system software. Using the installer that
 
      came with the system software the the best and safest way to
 
      install system software; hand installing parts can cause problems.
 
    * AppleWorks GS 1.1 comes with a memory tester (try it).
 
    * The TransWarp GS has a continuous test on the CDA (try it too).
 
  
8.10 My GS reported a problem with the Self Test. What do the numbers mean?
+
== I've got a problem. How do I troubleshoot it? ==
  
  The full list with explanations of these codes are available in
 
  Apple's technotes, archived here at
 
  http://www.visi.com/~nathan/a2/tn/iigs/095.html or
 
  ftp://ftp.apple.com/dts/aii/tn/iigs/tn-iigs-095. In short, the error
 
  code should be an 8-digit number in the form AABBCCDD. Look at the AA
 
  number, and check the following table:
 
  
  01: Failed checksum in motherboard RAM/ROM.
+
* Asking others for help is fine, but if you do, please provide the following information. (And the act of finding out this information may help you find the cause on your own)
  02: Failed ram on motherboard.
 
  03: Failed softswitch and register test.
 
  04: Failed RAM address test
 
  05: Failed Speed test
 
  06: Failed serial port test
 
  07: Failed clock test
 
  08: Failed Battery RAM test
 
  09: Failed Apple Desktop Bus (ADB- usually keyboards & mice) test
 
  0A: Failed shadow register test
 
  0B: Failed interrupts test
 
  0C: Failed Sound test
 
  
  Please note that with a Zip GS in the system, the system will always
+
1. Is it reproducible? One system crash that happened out of the blue and never reoccurred is almost impossible to track down and fix.
  report an error, even if none exists. You will get an 05xxxxxx if DIP
 
  switch 1-4 is ON, but if that's off, you're likely to get 0Bxxxxxx
 
  (not on all Zips) or 0Cxxxxxx errors. If you suspect a real problem,
 
  then you can either switch off the Zip (1-6 off), or remove the Zip
 
  from the system and try with the normal processor. Do all
 
  modifications to DIP switches or cards in general with the computer
 
  off, as usual.
 
  
8.11 My Apple II goes into a self test or reboots when I turn it on.
+
2. When did the fault appear? During boot? After a fixed amount of time? Whenever you do X in program Y?
  
  Try unplugging any joysticks, paddles, or anything else plugged into
+
3. Any and ALL error messages reported by the system. Copy them down and repeat them exactly; saying "it gave an error" is not useful.
  the back joystick port or the internal game port. Since the primary
 
  and secondary joystick buttons appear the same to the system as the
 
  open and closed (option on the GS) apple buttons, if your joystick's
 
  buttons are misreported as down, the system can assume you're trying
 
  to continually do a self test. If your system works without the
 
  joystick plugged in, your joystick is defective.
 
  
  This is a general rule of thumb for troubleshooting, as noted above.
+
4. How dead the system is. Does the mouse still work, but clicks do nothing? Does it do anything at all?
  Pull out EVERYTHING not needed for the problem (go down to computer,
 
  monitor, and optionally the keyboard for the base problems), and
 
  slowly add components until the problem reappears. When it does,
 
  you've isolated the problem. [As usual, only plug or unplug devices
 
  with the power off.]
 
  
8.12 My Hard Drive (or other disk) crashed! What do I do?
+
5. System configuration. What cards in what slots, how much RAM, which SCSI controller and rom version (if applicable), what size HD, etc.
  
  If you have adequate backups, reformat it, and copy the data back. If
+
* If you have just purchased a bunch of new hardware and/or software, resist the temptation to install all your new toys at once. Take it one step at a time and test everything after adding each item. (i.e. Run the diagnostics and try your old programs.)
  you don't have backups, this would be a good time to start praying.
 
  Dead disk recovery is a delicate art at best; be forewarned that there
 
  is a good chance that some to all data will be lost.
 
  
  Reminder: Keep good backups of any files you care about!
+
* If you have an enhanced //e, //c, IIc+, or GS, try the system self-test: hold down the Control key, the Open Apple key, and the Option (or Solid Apple) key. Then press and release Reset. Lastly, let up on the other keys. Sit back and 'Watchen Der Blinken Lighten.' If you run into a problem, please see the next section on self test errors and what they mean.
  
  There are two commercial programs that can do a decent job at
+
* Leave the computer plugged in, but turned off when installing cards. Touch the top of power supply before and often during your work. Better yet, use a wrist strap tied to ground through a 1 Megaohm resistor.
  recovering as much as possible from a ProDOS disk: ProSEL (8 and 16
 
  bit versions published by Charlie's Appleseeds) and Salvation:
 
  Deliverance (published by Vitesse). ProSEL-8 is the only package that
 
  runs on non-GS Apple IIs, so it may be your only choice. ProSEL-16 and
 
  Salvation both require GSs.
 
  
  Refer to their manuals for the specifics on how to attempt volume
+
* Make sure you have the required components for the program. Does it require an Enhanced //e? More RAM? A separate boot disk?
  restoration with them, though from what I've heard, they have a much
 
  better chance of restoring files in subdirectories, not the top-level
 
  directory. Thus, it may be prudent to store important files in
 
  subdirectories so that they can restored later. [With a limit of 51
 
  files in the top directory, you'll be forced into using subdirectories
 
  sooner or later on hard drives.]
 
  
  If you managed to repartition or erase your drive, at least with
+
* Never use your original disks. Make a backup and store the write-protected original in a safe place.
  ProSEL (and possibly also Salvation, though I have not used that or
 
  heard from any owners), you have a decent chance of restoring most
 
  files if you repartitioned it EXACTLY as it used to be partitioned:
 
  same partition sizes in the same order. Do NOT reformat the drive or
 
  partitions-- that'll write to all disk blocks, which will make
 
  recovery essentially impossible. Then, run ProSEL on it and tell it
 
  not to assume a valid volume bitmap for each partition. You'll
 
  probably lose files in the root directory, but it's a better than
 
  nothing.
 
  
8.13 My Apple II is reporting the wrong year. How do I fix that?
+
* Be sure to keep your disks away from stray magnetic fields, such as those emanating from phones, monitors and speakers.
  
  First, if you have a GS, and the internal clock is reporting the wrong
+
* If you have an accelerator, try to disable it or take it out entirely. It may not be compatible with the new item. (This is actually rare; the one consistent thing accelerators have problems is the GS's self test)
  year each time you boot up, you probably have a dead battery. See
 
  section 8.4 for where to get a replacement.
 
  
  ProDOS 8 does have a problem in its year calculating code-- the
+
* Check all your cable connections. Do not disconnect or connect any cables with the computer on-- this includes disk/hard drives, keyboards, mice, etc.
  designers assumed that a table holding only 6 years would be
 
  sufficient. They were wrong. You'll have to patch ProDOS every few
 
  years to keep it up to date; a text file including a Basic program is
 
  on Apple's FTP site:
 
  ftp://ftp.apple.com/dts/aii/sys.soft/slotclock-patch.txt
 
  
  The above is a Applesoft Basic source code inside a text file; you may
+
* Try pulling out other cards and disconnect your joystick. If you have a lot of cards, you might consider a Heavy-Duty Power Supply from A.E. It supplies 6 Amps instead of a measly 2.5 Amps. Test the power supply with a voltmeter while the computer is on.
  want to instead download the program included on the latest ProDOS 8
 
  system disk:
 
  ftp://ftp.apple.com/dts/aii/sys.soft/8bit.system.4.0.2/sysdisk402.bsc
 
  
8.14 My RamFAST board is reporting an error. What's the number mean?
+
* Call the manufacturer to see if there is an upgrade or a fix with the program.
  
  Here's a list of the RamFAST Fatal Memory Fault codes:
+
* Most RAM cards come with a memory tester. Try running it in continuous mode for several hours, even if your RAM seems to be working.
  
$00    Unknown, probably means that the RamFAST is very confused
+
* Verify your disk(s) with Copy ][+ or the Finder to see if you have any bad blocks. A better choice is ProSEL, which provides a comprensive set of disk verification and fixing errors.
$01-08  DRAM memory test failure
 
$09    EPROM checksum failure
 
$0C    Z180 processor crashed, indicates some hardware fault
 
$0D    Error writing cache data to disk
 
$0E    Termination power error
 
  
 +
* On a GS, check your control panel (control-open-apple-escape) settings: What is the startup slot set to? Is the slot set to "Your Card"? Check your RAM disk setting. Is it taking up all your memory? Try setting the speed to normal if it's a non-GS program.
  
8.15 What does "UNABLE TO LOAD PRODOS" mean when I boot a disk?
+
* On a GS, try take out or disable your INITS, CDAs, NDAs, and CDEVS. (With System 6, just hold down the shift key while booting). If the system is fine when shiftbooted, then there is probably a conflict between some of them. Try manually disabling a few at a time, and seeing if the problem disappears. You can narrow down a problem to an init or few that way.
  
  ProDOS is not automatically installed on every disk formatted under
+
* If you have a hard disk, try booting from a System Disk and/or reinstalling the latest system software. Using the installer that came with the system software the the best and safest way to install system software; hand installing parts can cause problems.
  ProDOS. All that is writted to disk is a very short boot stub that
 
  looks for a system (type 'SYS') file in the root directory called
 
  'PRODOS'. If that file is present, it is loaded, and ProDOS installs
 
  itself. If there is no PRODOS file found, the error message of "UNABLE
 
  TO LOAD PRODOS" is displayed on the screen.
 
  
  To make such a disk bootable, all you need to do is copy the file
+
* AppleWorks GS 1.1 comes with a memory tester (try it).
  'PRODOS' from a working ProDOS boot disk to the root directory of the
 
  disk you want to be able to boot from, assuming there is enough free
 
  space to copy that file.
 
  
  You will also want to copy at least one other system (type='SYS') to
+
* The TransWarp GS has a continuous test on the CDA (try it too).
  the root directory of any disk you want to boot, as ProDOS scans the
 
  root directory for the first SYS file with name ending in ".SYSTEM" to
 
  execute, or it'll be unhappy. A good candidate for such a file is
 
  Apple's "BASIC.SYSTEM", providing the Basic interpreter and command
 
  line interface to ProDOS.
 
  
  If you choose to use Macs and Disk Copy to download System 6.x, make
 
  sure to use Double Sided/Double Density (DSDD - 720K or 800K) disks--
 
  1.44MB (HD) disks will be written to as 1.44MB disks, which most GS
 
  drives cannot deal with. Also, if your GS is refusing to boot off the
 
  install disk (with an 'UNABLE TO LOAD PRODOS' message), and you have a
 
  Quadra or Powermac, you may be a victim of Apple's costcutting in 3.5"
 
  drives-- those drives may report disks as successfully written, but
 
  GSs will be unable to read them. Switch to an older Mac with a usable
 
  drive, or use a null modem program to transfer the files.
 
  
    _________________________________________________________________
+
== My GS reported a problem with the Self Test. What do the numbers mean? ==
  
GS System 6.0 mini-FAQ
 
  
  9.1 Where can I get System 6, and what fixes are there for the known bugs in
+
The full list with explanations of these codes are available in Apple's technotes, archived here at http://www.visi.com/~nathan/a2/tn/iigs/095.html or ftp://ftp.apple.com/dts/aii/tn/iigs/tn-iigs-095. In short, the error code should be an 8-digit number in the form AABBCCDD. Look at the AA number, and check the following table:
  it?
+
 
 
+
<tab class=wikitable sep=bar>
  First off, if you don't have it on your GS, you may want to consider
+
<A2Txt>Test No. </A2Txt>|<A2Txt> Test Name/Section</A2Txt>
  upgrading to System 6.0.1. Like all GS/OS releases, you will need to
+
01:|Failed checksum in motherboard RAM/ROM.
  make sure you've got a ROM 01 or ROM 3 before you even think about
+
02:|Failed ram on motherboard.
  running it. Although you may be able to get it to boot in less RAM,
+
03:|Failed softswitch and register test.
  1.25MB of RAM is pretty much a minimum; 1.5-2MB RAM is recommended if
+
04:|Failed RAM address test
  you want to run a lot of the fun addons. Secondly, an 800K floppy is
+
05:|Failed Speed test
  rather cramped for space as a boot disk; a Hard Drive helps immensely.
+
06:|Failed serial port test
  (If you're looking to strip a boot disk down to get as much space as
+
07:|Failed clock test
  possible, please see my reference of files in the GS/OS installation
+
08:|Failed Battery RAM test
  at http://www.visi.com/~nathan/a2/faq/sys6files.html.)
+
09:|Failed Apple Desktop Bus (ADB- usually keyboards & mice) test
 
+
0A:|Failed shadow register test
  System 6.0.1 has a number of bugfixes and small addons from System
+
0B:|Failed interrupts test
  6.0; they both have similar RAM requirements, so you should consider
+
0C:|Failed Sound test
  moving to System 6.0.1 if at all possible. Also, many problems that
+
</tab>
  existed in System 6.0 and 6.0.1 have only been fixed in patches to
+
 
  System 6.0.1, such as the HFS FST and programs that GUPP fixes. (See
+
 
  below)
+
Please note that with a Zip GS in the system, the system will always report an error, even if none exists. You will get an 05xxxxxx if DIP switch 1-4 is ON, but if that's off, you're likely to get 0Bxxxxxx (not on all Zips) or 0Cxxxxxx errors. If you suspect a real problem, then you can either switch off the Zip (1-6 off), or remove the Zip from the system and try with the normal processor. Do all modifications to DIP switches or cards in general with the computer off, as usual.
 
+
 
  Next, you'll want to download them. On the internet, they're available
+
 
  in Apple II (.BSQ) form from Apple's FTP site at
+
== My Apple II goes into a self test or reboots when I turn it on. ==
  ftp://ftp.apple.com/dts/aii/sys.soft/gs.system.6.0.1/. There are 6
+
 
  disks to either System 6.0 or System 6.0.1; you should download and
+
 
  unpack them (with Binscii and Shrinkit. Then, boot the Install disk.
+
Try unplugging any joysticks, paddles, or anything else plugged into the back joystick port or the internal game port. Since the primary and secondary joystick buttons appear the same to the system as the open and closed (option on the GS) apple buttons, if your joystick's buttons are misreported as down, the system can assume you're trying to continually do a self test. If your system works without the joystick plugged in, your joystick is defective.
 
+
 
  When unpacking the .BSQ files from Apple's FTP site without a hard
+
This is a general rule of thumb for troubleshooting, as noted above. Pull out EVERYTHING not needed for the problem (go down to computer, monitor, and optionally the keyboard for the base problems), and slowly add components until the problem reappears. When it does, you've isolated the problem. [As usual, only plug or unplug devices with the power off.]
  drive, you'll notice that some of the disks can be larger than 800K,
+
 
  even when partially unpacked. Creating a Ramdisk from the control
+
 
  panel greater than 800K will let you unpack these big disks without
+
== My Hard Drive (or other disk) crashed! What do I do? ==
  any problems. (Remember to kill off that ramdisk before trying to run
+
 
  GS/OS if you have less than 1.5MB of RAM)
+
 
 
+
If you have adequate backups, reformat it, and copy the data back. If you don't have backups, this would be a good time to start praying. Dead disk recovery is a delicate art at best; be forewarned that there is a good chance that some to all data will be lost.
  If you have access to a Mac with "Disk Copy", you may want to instead
+
 
  try downloading the disks in that format from
+
Reminder: Keep good backups of any files you care about!
  ftp://ftp.apple.com/Apple.Support.Area/Apple.Software.Updates/US/Apple
+
 
  _II/Apple_IIGS_System_6.0.1/
+
There are two commercial programs that can do a decent job at recovering as much as possible from a ProDOS disk: ProSEL (8 and 16 bit versions published by Charlie's Appleseeds) and Salvation: Deliverance (published by Vitesse). ProSEL-8 is the only package that runs on non-GS Apple IIs, so it may be your only choice. ProSEL-16 and Salvation both require GSs.
 
+
 
  If you choose to use Macs and Disk Copy to download System 6.x, make
+
Refer to their manuals for the specifics on how to attempt volume restoration with them, though from what I've heard, they have a much better chance of restoring files in subdirectories, not the top-level directory. Thus, it may be prudent to store important files in subdirectories so that they can restored later. [With a limit of 51 files in the top directory, you'll be forced into using subdirectories sooner or later on hard drives.]
  sure to use Double Sided/Double Density (DSDD - 720K or 800K) disks--
+
 
  1.44MB (HD) disks will be written to as 1.44MB disks, which most GS
+
If you managed to repartition or erase your drive, at least with ProSEL (and possibly also Salvation, though I have not used that or heard from any owners), you have a decent chance of restoring most files if you repartitioned it EXACTLY as it used to be partitioned: same partition sizes in the same order. Do NOT reformat the drive or partitions-- that'll write to all disk blocks, which will make recovery essentially impossible. Then, run ProSEL on it and tell it not to assume a valid volume bitmap for each partition. You'll probably lose files in the root directory, but it's a better than nothing.
  drives cannot deal with. Also, if your GS is refusing to boot off the
+
 
  install disk (with an 'UNABLE TO LOAD PRODOS' message), and you have a
+
 
  Quadra or Powermac, you may be a victim of Apple's costcutting in 3.5"
+
== My Apple II is reporting the wrong year. How do I fix that? ==
  drives-- those drives may report disks as successfully written, but
+
 
  GSs will be unable to read them. Switch to an older Mac with a usable
+
 
  drive, or use a null modem program to transfer the files.
+
First, if you have a GS, and the internal clock is reporting the wrong year each time you boot up, you probably have a dead battery. See section 8.4 for where to get a replacement.
 
+
 
  While a little too big for this FAQ, Nathan Mates has written a
+
ProDOS 8 does have a problem in its year calculating code-- the designers assumed that a table holding only 6 years would be sufficient. They were wrong. You'll have to patch ProDOS every few years to keep it up to date; a text file including a Basic program is on Apple's FTP site: ftp://ftp.apple.com/dts/aii/sys.soft/slotclock-patch.txt
  reference detailing the various files installed by System 6.0.1 with
+
 
  comments on their use, as well as which files are required for minimal
+
The above is a Applesoft Basic source code inside a text file; you may want to instead download the program included on the latest ProDOS 8 system disk: ftp://ftp.apple.com/dts/aii/sys.soft/8bit.system.4.0.2/sysdisk402.bsc
  disk usage. Please see
+
 
  http://www.visi.com/~nathan/a2/faq/sys6files.html.
+
 
 
+
== My RamFAST board is reporting an error. What's the number mean? ==
  9.2 Common Problems
+
 
 
+
 
  If you are still using System 6.0, it is recommended that you upgrade
+
Here's a list of the RamFAST Fatal Memory Fault codes:
  to the latest and greatest version, 6.0.1. It is available at Apple's
+
 
  FTP site (see section for the address).
+
<tab class=wikitable sep=bar>
 
+
<A2Txt>Code </A2Txt>|<A2Txt> Meaning</A2Txt>
  The HFS (Macintosh) FST (File system translator) included with System
+
$00|Unknown, probably means that the RamFAST is very confused
  6.0.1 does contain at least one bug, which can corrupt a HFS volume of
+
$01-08|DRAM memory test failure
  64MB or larger. It is strongly encouraged that you download and
+
$09|EPROM checksum failure
  install the patch. (You'll need to copy all the files off to non-HFS
+
$0C|Z180 processor crashed, indicates some hardware fault
  volumes, install, and copy back for safety). The patch is available
+
$0D|Error writing cache data to disk
  from ftp://apple2.caltech.edu/pub/apple2/addons/patches/patchhfs.shk
+
$0E|Termination power error
 
+
</tab>
  I (Nathan Mates) have had HFS volumes corrupted, so I'm pretty
+
 
  confident that there are more bugs in the FST. There are no native GS
+
 
  HFS volume checkers; you'll have to take the drive to a Mac anytime
+
== What does "UNABLE TO LOAD PRODOS" mean when I boot a disk? ==
  you need to run a checker such as Apple's Disk First Aid or Norton
+
 
  Utilities. (Also, Macs want a special driver, which may require you to
+
 
  [re]format the drive on a mac, or use a special program to insert it.
+
ProDOS is not automatically installed on every disk formatted under ProDOS. All that is writted to disk is a very short boot stub that looks for a system (type 'SYS') file in the root directory called 'PRODOS'. If that file is present, it is loaded, and ProDOS installs itself. If there is no PRODOS file found, the error message of "UNABLE TO LOAD PRODOS" is displayed on the screen.
  This boils down to the general computer rule of thumb: If you care
+
 
  about your files, make sure you have backups!
+
To make such a disk bootable, all you need to do is copy the file 'PRODOS' from a working ProDOS boot disk to the root directory of the disk you want to be able to boot from, assuming there is enough free space to copy that file.
 
+
 
  Despite the hard work of the Apple Computer programmers, some bugs
+
You will also want to copy at least one other system (type='SYS') to the root directory of any disk you want to boot, as ProDOS scans the root directory for the first SYS file with name ending in ".SYSTEM" to execute, or it'll be unhappy. A good candidate for such a file is Apple's "BASIC.SYSTEM", providing the Basic interpreter and command line interface to ProDOS.
  slipped through in System 6.0.1. Both as a recommendation for system
+
 
  stability, and as a plug for a program of his, Nathan Mates
+
If you choose to use Macs and Disk Copy to download System 6.x, make sure to use Double Sided/Double Density (DSDD - 720K or 800K) disks-- 1.44MB (HD) disks will be written to as 1.44MB disks, which most GS drives cannot deal with. Also, if your GS is refusing to boot off the install disk (with an 'UNABLE TO LOAD PRODOS' message), and you have a Quadra or Powermac, you may be a victim of Apple's costcutting in 3.5" drives-- those drives may report disks as successfully written, but GSs will be unable to read them. Switch to an older Mac with a usable drive, or use a null modem program to transfer the files.
  (maintainer of this FAQ) has found and fixed a number of them. These
+
 
  include memory trashing bugs in the 6.0.1 Finder, the Pascal FST not
+
 
  recognizing legal punctuation in disk names, and many more. Get the
+
 
  free program 'GUPP' (Grand Unified Patch Program) from a major Apple
+
= GS System 6.0 mini-FAQ =
  II FTP site, or directly from Nathan's ftp site for his programs:
+
 
  ftp://ftp.visi.com/users/nathan/a2software/gupp.shk
+
 
 
+
== Where can I get System 6, and what fixes are there for the known bugs in it? ==
  Copy ][+ may be a great program for making the one personal backup
+
 
  copy of a piece of software that you are legally entitled to, but its
+
 
  file copy, delete, and directory sorting functions will corrupt a disk
+
First off, if you don't have it on your GS, you may want to consider upgrading to System 6.0.1. Like all GS/OS releases, you will need to make sure you've got a ROM 01 or ROM 3 before you even think about running it. Although you may be able to get it to boot in less RAM, 1.25MB of RAM is pretty much a minimum; 1.5-2MB RAM is recommended if you want to run a lot of the fun addons. Secondly, an 800K floppy is rather cramped for space as a boot disk; a Hard Drive helps immensely. (If you're looking to strip a boot disk down to get as much space as possible, please see my reference of files in the GS/OS installation at http://www.visi.com/~nathan/a2/faq/sys6files.html.)
  when used on a directory with GS/OS 'forked' files. (Pretty much all
+
 
  of the system software is forked, as are most GS applications). Do NOT
+
System 6.0.1 has a number of bugfixes and small addons from System 6.0; they both have similar RAM requirements, so you should consider moving to System 6.0.1 if at all possible. Also, many problems that existed in System 6.0 and 6.0.1 have only been fixed in patches to System 6.0.1, such as the HFS FST and programs that GUPP fixes. (See below)
  use it on disks or HD partitions with such files. ProSEL 8 or 16 can
+
 
  repair some of the damage done, and provide safe disk and file
+
Next, you'll want to download them. On the internet, they're available in Apple II (.BSQ) form from Apple's FTP site at ftp://ftp.apple.com/dts/aii/sys.soft/gs.system.6.0.1/. There are 6 disks to either System 6.0 or System 6.0.1; you should download and unpack them (with Binscii and Shrinkit. Then, boot the Install disk.
  utilities.
+
 
 
+
When unpacking the .BSQ files from Apple's FTP site without a hard drive, you'll notice that some of the disks can be larger than 800K, even when partially unpacked. Creating a Ramdisk from the control panel greater than 800K will let you unpack these big disks without any problems. (Remember to kill off that ramdisk before trying to run GS/OS if you have less than 1.5MB of RAM)
  If the mouse cursor wipes out everything it moves over, you may have a
+
 
  software conflict with Closeview. To deactivate it, from within the
+
If you have access to a Mac with "Disk Copy", you may want to instead try downloading the disks in that format from ftp://ftp.apple.com/Apple.Support.Area/Apple.Software.Updates/US/Apple _II/Apple_IIGS_System_6.0.1/
  Finder, open the 'System' folder on your boot disk, then the
+
 
  'System.Setup' folder. Find the icon named 'Closeview', and click once
+
If you choose to use Macs and Disk Copy to download System 6.x, make sure to use Double Sided/Double Density (DSDD - 720K or 800K) disks-- 1.44MB (HD) disks will be written to as 1.44MB disks, which most GS drives cannot deal with. Also, if your GS is refusing to boot off the install disk (with an 'UNABLE TO LOAD PRODOS' message), and you have a Quadra or Powermac, you may be a victim of Apple's costcutting in 3.5" drives-- those drives may report disks as successfully written, but GSs will be unable to read them. Switch to an older Mac with a usable drive, or use a null modem program to transfer the files.
  on it. Then, from the 'Special' menu, choose 'Icon Info...'. A window
+
 
  will open up, with a check box for 'Inactive' in the top right. After
+
While a little too big for this FAQ, Nathan Mates has written a reference detailing the various files installed by System 6.0.1 with comments on their use, as well as which files are required for minimal disk usage. Please see http://www.visi.com/~nathan/a2/faq/sys6files.html.
  setting it to inactive, reboot. You can do the same thing for any
+
 
  other Desk Accessory, Control Panel (CDev), or Init (in the
+
 
  System.Setup folder, should you decide not to want to run it.
+
== Common Problems ==
 
+
 
  Easy Access also can and does cause lockups with programs, especially
 
  on the ROM 01. Deactivate it just like you did with the Closeview
 
  program-- it's in the same folder.
 
 
 
  If you are getting an annoying message about Appletalk not being
 
  available at boot, but you're not using Appletalk in general, disable
 
  the 'SCC.Manager' file in the drivers folder inside the system folder
 
  on your boot disk.
 
 
 
  Missing features of system 6? Perhaps you just used easy install,
 
  which doesn't install all the bells and whistles. Try clicking on the
 
  'Custom' install (versus the easy install) in the Sys 6.0 installer
 
  and add the nifty things like Calculator, Find File, HFS FST, etc. You
 
  can also read the Shortcuts file on the 'SystemTools2' disk for some
 
  great keyboard shortcuts.
 
 
 
  Finder 6.0 icons that match by name and have a leading wildcard
 
  require uppercase letters. For example, a name like "*.txt" never
 
  matches, but "*.TXT" works fine (it matches regardless of a file's
 
  actual capitalization). (This was accidental; the 5.0.4 Finder did not
 
  care about capitalization in icon files.)
 
 
 
  Two misconceptions about System 6: The A2.RAMCARD is not for the GS's
 
  /RAM5. It only works with "slinky" (i.e. standard slot) cards. Also,
 
  the DOS 3.3 FST has nothing to do with MS-DOS.
 
 
 
  9.3 Tips & Hints
 
 
 
  The AppleShare logon programs have always looked for a folder named
 
  "Mail" inside your user folder whenever you log onto a user volume. If
 
  there's any items in there, they present a dialog that says "You have
 
  mail." With the Sounds control panel, you can make it play a sound of
 
  your choice then.
 
 
 
  If you don't want to see your icons on boot, set bit 1 (i.e. the 2nd
 
  LSB) of BRAM Location $5F. Be sure not to mess with the other bits.
 
  Use the toolbox calls!
 
 
 
  The FinderExtras folder goes in the same folder as the Finder
 
  (generally the System folder).
 
 
 
  If you don't like yellow folders in the Finder you can change the byte
 
  at offset +65 in the Finder resource with type $C001 and ID 1. Change
 
  the $E0 to whatever you want (the first digit is the default folder
 
  foreground color, and the low nibble is for the outline color). Only
 
  folders that do not already have a color recorded in a Finder.Data
 
  file get the default color.
 
 
 
  9.4 If you have a RamFAST
 
 
 
  The RamFast and ProDOS 2.0.1 both try to do re-mapping of drives to
 
  unused slots. This can cause problems, mostly when launching and
 
  returning from ProDOS 8 applications (crashes or wants you to insert
 
  disk). Solution: Configure the RamFast not to re-map. If you have a
 
  RamFAST with a ROM revision less than 2.01a, you need to get a newer
 
  ROM from Sequential Systems. Otherwise, V2.01c allows setting Slot
 
  Priority Allocations to 0 which will let ProDOS deal with them. V3.0
 
  allows you to choose between RamFast mapping (works now) and ProDOS 8
 
  mapping. If you can't wait, you can Patch ProDOS 2.0 not to re-map
 
  slots. Look for "10 BF C9 A5 D0 07" and change the $A5 to $00 (should
 
  be byte $1A3 in the 5th block of the file). Hack at your own risk.
 
 
 
  9.5 If you have a Vulcan or AE High Density disk
 
 
 
  Due to problems with the Vulcan, when booting, it asks for your System
 
  Disk. Just put the Vulcan driver on your boot disk, boot it, and then
 
  launch the installer. Alternately, put the driver on the installer
 
  disk and boot it. (but you have to delete some of the installer
 
  scripts first) For the AE High Density Drive, be sure to remove
 
  Apple's 3.5" driver when putting on AE's.
 
 
 
  9.6 If you have ProSel as your program launcher
 
 
 
  Rename start to something else before running the installer, or else
 
  the Finder won't be installed. Also, ProSEL as a launcher will cause a
 
  bogus $0040 error on some programs such as the first DOTW release.
 
 
 
  9.7 If you have an AMR 3.5" drive
 
 
 
  If the computer hangs (mostly at the Standard File Save/Open dialog
 
  box) with no disk in the drive, try putting one in. What's happening
 
  is that GS is reading the status from the drive, and the drive won't
 
  return anything unless there is a disk in the drive. Just stick a disk
 
  in and all will be fine. If it really annoys you, either deactivate
 
  the 3.5" driver (get IR so you can double-click to re-activate it) or
 
  simply keep a disk in the drive at all times. This is not a problem
 
  under ProDOS 8.
 
 
 
  9.8 GSCII+ & HFS Note
 
 
 
  There is a problem with the HFS FST, but only GSCII seems to be
 
  affected. When de-binscii-ing files, put the output onto a ProDOS
 
  volume, not an HFS one.
 
 
 
  [ Mega-thanks to Dave Lyons & friends for these. ]
 
 
 
  9.9 Finder 6.0.1 is displaying garbage in the windows!
 
 
 
  System 6.0.1's Finder occasionally gets some of its files corrupted,
 
  and then fills a window (or the screen) with multicolor garbage when a
 
  window is opened. This is extremely annoying, but there are ways to
 
  fix it. First, try installing Grand Unified Patcher Program (see the
 
  section above (9.1) on system 6.x patches).
 
 
 
  If that doesn't work, go to the 'Preferences...' menu item under the
 
  Finder's 'Special' menu, and turn off the hiding of invisible files.
 
  Inside the 'Icons' folder on each disk/partition, there's a file
 
  called 'Desktop'. Trash it, and reboot. [This file contains window
 
  sizes and custom icon placements, as well as duplicate copies of icons
 
  from System 6-savvy applications with 'rBundles' attached. No real
 
  harm other than losing the window placements is done by trashing it.]
 
 
 
  Lastly, you can look for bad icon files-- make a new folder (such as
 
  'Icons2') on each hard drive, and move all files except 'Ftype.Apple'
 
  out of the Icons folder on each disk/partition to the new folder.
 
  Reboot and see if the problem still occurs. If not, move a few files
 
  back at a time, reboot, and see if you have the problem. When you've
 
  isolated the problem file, don't use it anymore.
 
 
 
  9.10 Icons no longer point to apps. How do I rebuild the desktop database?
 
 
 
  Easiest way: from Finder, go to prefs, turn off hide invisible files.
 
  In each disk partition's 'Icons' folder, there should be a file named
 
  'desktop'. Delete it. That'll just force a new desktop database file
 
  to be created next time you start the Finder; you'll still have to
 
  click on each file that put its rBundles into there to rebuild it.
 
 
 
  Better way: Softdisk G-S #47 or 48, program I (Nathan Mates) wrote
 
  called 'Rebuilder'. Deletes the desktop file, then scans the drive for
 
  all rBundles and adds them.
 
 
 
  9.11 How do I make a 3.5" disk that boots and runs an Application?
 
 
 
  Assuming that this (or any other program) is a ProDOS 16 or GS/OS app,
 
  the way to put it on a self-booting disk is:
 
 
 
  1) Format disk, install GS/OS on it, with any desired extensions, etc
 
 
 
  2a) Copy the app you want to run to the system folder of that disk,
 
  and rename it 'Start'
 
  -OR-
 
  2b) Copy the app you want to run to the root directory (lowest level)
 
  of the disk, and make sure its filename ends in ".SYS16", renaming it
 
  if necessary. If you do this, delete any 'Start' program in the system
 
  folder.
 
 
 
  This assumes that the program is small enough to fit on that disk; if
 
  space it tight, you may want to consult either
 
  http://www.visi.com/~nathan/a2/faq/mini.601.html and/or
 
  http://www.visi.com/~nathan/a2/faq/sys6files.html for lists of what
 
  files you might be able to remove.
 
 
 
  9.12 What's the difference between 2:1 and 4:1 3.5" formatting?
 
 
 
  These two ratios are possible interleave factors for 3.5" disks.
 
  Unidisks 3.5"s maximum speed is at the 4:1 interleave factor; if 2:1
 
  disks are inserted in them, a lot of time will be wasted while the
 
  disk blows revolutions reading sequential sectors. Apple 3.5" drives
 
  best speed is at 2:1; 4:1 disks in them can be accessed slightly
 
  slower than 2:1, but not anywhere near as bad as 2:1 disks in Unidisk
 
  drives. Thus, if you don't have Unidisk drives, 2:1 should be
 
  selected, but if you're using a mix of drives or Unidisks, 4:1 is the
 
  optimal speed.
 
 
 
  9.13 What do I do with icon files for the Finder, and how can I customize how
 
  they appear?
 
 
 
  Under System 6.0, each volume you have online can (and the Finder will
 
  occasionally auto-add this) have a folder named 'Icons' in the root
 
  directory. Applications with separate icons files (as identified by a
 
  Finder 'Get Info') can have that icons file copied to the Icons folder
 
  of that partition. For example, the application
 
  /Games1/OneArmBattle/OneArmBattle should have its icon file copied to
 
  /Games1/Icons/ . Most icons files are simply cute fluff, and are not
 
  needed to run things correctly. A lot of files may also slow down
 
  loading of the Finder, as it must reload all icons files each time.
 
 
 
  The 'FType.Apple' file installed to the Icons folder of the boot disk
 
  along with the rest of the System Software is a required file for the
 
  Finder, GS Shrinkit, and possibly other applications. Do not mess with
 
  it; it does not contain any icons, but the text descriptions of file
 
  types you can see from the Finder.
 
 
 
  If you want to make your own icons, or point them at various
 
  applications, the best way to do this is to make up a custom icon for
 
  the filetype, and set the icon application path to the application you
 
  want to run. IconED 2.0 is a good icon editor, and is available from
 
  ftp://apple2.caltech.edu/pub/apple2/utils/. Once your icon file is
 
  created, it should be saved in an Icons folder on one of your disks,
 
  preferably the boot volume. As the first match of an icon is used, you
 
  may want to do a directory sort to move your custom file to the top of
 
  the Icons folder or elsewhere if things are matching oddly.
 
  
    _________________________________________________________________
+
If you are still using System 6.0, it is recommended that you upgrade to the latest and greatest version, 6.0.1. It is available at Apple's FTP site (see section for the address).
  
Resources for the Apple II 6/12/97
+
The HFS (Macintosh) FST (File system translator) included with System 6.0.1 does contain at least one bug, which can corrupt a HFS volume of 64MB or larger. It is strongly encouraged that you download and install the patch. (You'll need to copy all the files off to non-HFS volumes, install, and copy back for safety). The patch is available from ftp://apple2.caltech.edu/pub/apple2/addons/patches/patchhfs.shk
  
 +
I (Nathan Mates) have had HFS volumes corrupted, so I'm pretty confident that there are more bugs in the FST. There are no native GS HFS volume checkers; you'll have to take the drive to a Mac anytime you need to run a checker such as Apple's Disk First Aid or Norton Utilities. (Also, Macs want a special driver, which may require you to [re]format the drive on a mac, or use a special program to insert it. This boils down to the general computer rule of thumb: If you care about your files, make sure you have backups!
  
  Listed below are some places to get information about the Apple II.
+
Despite the hard work of the Apple Computer programmers, some bugs slipped through in System 6.0.1. Both as a recommendation for system stability, and as a plug for a program of his, Nathan Mates (maintainer of this FAQ) has found and fixed a number of them. These include memory trashing bugs in the 6.0.1 Finder, the Pascal FST not recognizing legal punctuation in disk names, and many more. Get the free program 'GUPP' (Grand Unified Patch Program) from a major Apple II FTP site, or directly from Nathan's ftp site for his programs: ftp://ftp.visi.com/users/nathan/a2software/gupp.shk
  You should also try your local user group (and the user group
 
  library), friends, relatives, library, school, FTP sites, books, and
 
  etc. One good book is "The Whole Internet Users Guide & Catalog" by Ed
 
  Kroll, published by O'Reilly & Associates Inc.
 
 
 
  Nathan Mates has a set of WWW pages with all sorts of online
 
  resources, more Apple II FAQs and more; visit
 
  http://www.visi.com/~nathan/a2/index.html
 
 
 
  10.1 Apple II Groups
 
 
 
  You can become an associate in the Apple Developer Program for $350
 
  (for Mac and Apple II) or a mere $150 (for Apple II only) by calling
 
  1-408-974-4897. That gets you Develop magazine, Apple Technical notes,
 
  the Apple Developer CD, discounts on Apple products, and more! If you
 
  want to license Apple Software for distribution with your product you
 
  can get information by calling 1-408-974-4667. (Note: You need a
 
  license to distribute Apple System Software, including ProDOS, and the
 
  Installer.)
 
 
 
  USUS (Keith Frederick (Secretary), P.O. Box 1148, La Jolla, CA 92038)
 
  is an international non-profit organization dedicated to promoting and
 
  influencing software standards to aid in the development of portable
 
  software. They have a large software library including a lot of source
 
  code (for almost every language or computer).
 
 
 
  NAUG, the National AppleWorks Users Group used to be a group devoted
 
  to that wonder program, AppleWorks. Joe Kohn and SSII have taken over
 
  distribution of their materials; see
 
  http://www.crl.com/~joko/naug.html
 
 
 
  10.2 Hardware and Software Vendors
 
 
 
  There is a larger set of lists with more WWW links available at Nathan
 
  Mates's set of Apple II Companies pages at
 
  http://www.visi.com/~nathan/a2/com/index.html. The following list is
 
  in alphabetical order by company name; no guarantees are made about
 
  the suitability of products listed, companies, or anything else.
 
 
 
  Alltech Electronics (http://www.allelec.com/, 760-724-2404 orders,
 
  760-724-8808 FAX, 2618 Temple Heights, Oceanside CA, 92056;
 
  info@allelec.com) sells all kinds of hardware and general software for
 
  Apple II's-- one of the best 1-stop shopping areas.
 
 
 
  The Apple User Group Connection (800-538-9696 ext 500) can tell you
 
  the closest Apple II (or Macintosh) User Group.
 
 
 
  The ARC (Apple Resource Center, http://www.thearc.com/ (209) 832-4300,
 
  FAX (209) 832-3270, Orders (800) 753-0114, thearc@thearc.com, 1014
 
  Central Avenue
 
  Tracy, CA 95376, U.S.A.) has a number of replacement parts for Apple
 
  II items as well as some repair facilities.
 
 
 
  Atlaz Computer Supply (616 Burnside Ave, Inwood, NY 11096.
 
  516-239-1854 phone, 516-239-1939 fax, 888-here-fax fax,
 
  atlaz@pipeline.com)is reported to sell cables for connecting //cs to
 
  other devices like printers and modems, as well as other items.
 
 
 
  Adrian Vance's 'AV Systems' (http://www.webmag.com/AVCatalog/
 
  702-395-3572, P. O. Box 26533, Las Vegas, NV 89126) publishes a "Apple
 
  II Survival Manual" has 450 disks in it for the Apple II, all models.
 
 
 
  Stephen Buggie, (buggie@unm.edu, 200 College Rd. Gallup NM 87301)
 
  modifies IBM PC power supplies to fit Apple IIs, as well as Disk ][
 
  modifications. Contact him for pricing, availability and specific
 
  product details.
 
 
 
  The Byte Works (http://www.hypermall.com/byteworks/index.html 8000
 
  Wagon Mound Drive N.W. Albuquerque, NM 87120 (505) 898-8183 email
 
  mikew50@aol.com) is still selling Apple IIGS assemblers, compilers,
 
  and utility programs such as a spreadsheet and a morphing program.
 
  They are also one of the few sources for Apple II books full of
 
  technical and programming information.
 
 
 
  Steve Cavanaugh (appleblossom@delphi.com,
 
  http://people.delphi.com/appleblossom/ 8 Ardley Street, Brockton, MA
 
  02402) has now taken over the distribution of a 5.25" disk with modem
 
  utilities, a terminal program (Comm.System 2.5), Shrinkit 3.4, BinSCII
 
  1.0.3, UU 1.1, Sneeze 2.2 and UnShrink 2.1 in ready to run format.
 
  Also included are all the docs for the above programs, plus Zlink (in
 
  archived format). this service. Send $3 to cover postage and materials
 
  to Steve Cavanaugh, Apple Blossom Publishing, P.O. Box 120434, Boston,
 
  MA 02112-0434. [Chuck Orem used to provide this.] He is also licensed
 
  to copy ProDOS 8; contact him for details. He also publishes The Apple
 
  Blossom, a "bimonthly newsletter reviewing new hardware and software
 
  for the Apple II computer as well as presenting original how-to
 
  articles and interviews." He's also involved in Hyper Quarterly, "our
 
  new disk-based subscription for Apple IIGS users. Every three months
 
  subscribers will get two disks of the latest and greatest in HyperCard
 
  IIGS stacks. The premier issue will be sent out at the end of April,
 
  1997."
 
 
 
  CCV Software (http://catalog.ccvsoftware.com/ is still selling many
 
  Apple II commercial educational and productivity titles.
 
 
 
  Charlie's Appleseeds (chuckn@pro-nsdapple.cts.com 9081 Hadley Place
 
  San Diego CA 92126-1523 (619) 566-1297 (weekends, try 619 566-0387)),
 
  sells ProSEL-8 and ProSEL-16, which includes disk fixing utilities for
 
  ProDOS disks.
 
 
 
  The Tulin IIGS SCSI driver for Flopticals (possibly also Zip disks)
 
  and Apple's HS SCSI cards are available from Wing Cheung 4901 Corona
 
  Court Union City, CA 94587 email wing_cheung@compuserve.com Ask for
 
  pricing and availability.
 
 
 
  Compu-Teach Educational Software (http://www.wolfenet.com/~cmpteach/
 
  ), 1-800-448-3224, still sells various Apple II educational software
 
  titles.
 
 
 
  Creative Solutions (http://members.aol.com/CreatSltn/
 
  CreatSltn@aol.com, (513) 429-5759 M-F 9-5) is located in Beavercreek,
 
  OH, and "Specializes in hardware, software, and repairs of AppleII,
 
  Macintosh, Laser, and Franklin computers."
 
 
 
  The Cynosure BBS (410-549-2584 Settings: 8 data bits, No parity 1 stop
 
  bit, up to 14400 bps) has a license to distribute system Apple
 
  software (ProDOS and GS/OS). Contact Doug Granzow at
 
  dig@pro-cynosure.cts.com.
 
 
 
  Digisoft Innovations (digisoft@hypermall.com) has a CD called Golden
 
  Orchard that is full of Apple II-specific programs. 18MB is accessable
 
  from 8-bit //e's, the rest is in HFS partitions that can be accessed
 
  with GS/OS System 6. Cost is around $60. They also have published
 
  Twilight II, a screen saver for the IIGS.
 
 
 
  The 'Duncan Institute' has a large library of educational software for
 
  Apple IIs; their web site is http://www.gate.net/~duncanin/
 
 
 
  Edlie Electronics (800-645-4722 or 516-735-3330) is selling "The
 
  ProDOS User's Kit". It seems to be your basic ProDOS operating system
 
  and a manual. I doubt that it's a current version, but it's worth a
 
  look if you need ProDOS on 5.25".
 
 
 
  Educational Resources (800-624-2926) sells educational programs for
 
  the II.
 
 
 
  EGO Systems (http://www.hypermall.com/ego/ 423-843-1775, Fax
 
  423-843-0661 e-mail diz@chattanooga.net), has discontinued their GS+
 
  Magazine, and is closing down their line of various Apple II hardware
 
  and software items.
 
 
 
  Intrec Software (http://www.intrec.com/) is still selling ProTERM 3.1,
 
  the best text comm software for 8 and 16 bit Apple IIs.
 
 
 
  Kitchen Sink Software ( http://www.kitchen-sink.com/ email:
 
  info@kitchen-sink.com, 1169 Stroud Ct. Westerville, OH 43081-1134
 
  800-235-5502, 614-891-2111 (voice) 614-891-4545 (fax)) is still
 
  supporting its Apple II products.
 
 
 
  Kula Software (http://www.angelfire.com/hi/kulasoft/ 2118 Kula Street
 
  Honolulu, HI 96817, (808) 595-8131 kulasoft@pixi.com) has a number of
 
  disks full of software, as well as misc books, used software, and
 
  indices of various magazines.
 
 
 
  Michael Lutynski (626-335-7506, animasia@rocketmail.com), the author
 
  of Animasia 3D (GS desktop animation application) is still selling
 
  copies for $99, contact him for details. [Manuals may need to be
 
  reprinted occasionally.]
 
 
 
  LYBEN Computer Systems at (800) 493-5777 is reported to sell cables
 
  for connecting //cs to other devices like printers and modems.
 
 
 
  Marin Macroworks, 1675 Grand Avenue, San Rafael, CA 94901-2211.
 
 
 
  MECC (http://www.mecc.com/ 800-685-MECC) is a well-known educational
 
  software shop.
 
 
 
  Memory Plus Distributors (602-990-2327) has a number of hardware items
 
  available; contact them for details.
 
 
 
  M&M Software has a large collection of mainly educational software for
 
  the Apple II, Macintosh, DOS and Windows. Their web site is at
 
  http://www.mm-soft.com/ 800-642-6162, M&M Software, P.O. Box 15769,
 
  Long Beach, CA 90815.
 
 
 
  National Communications Inc.
 
  (http://www.thomasregister.com:8000/olc/natcomm/apple.htm) sells a
 
  number of cables such as modems that they claim to be compatible with
 
  Apple IIs, //cs, Laser 128s, and the like.
 
 
 
  Parkhurst Micro Products (510-837-9098) sells ANSITerm, a GS-only
 
  communications program that supports X/Y/Z-Modem (plus variants),
 
  Kermit, VT-100, Color ANSI, and offers features like a text editor, a
 
  large scrollback buffer, and macros.
 
 
 
  Procyon Enterprises, Inc (http://www.hypermall.com/companies/procyon/
 
  PO Box 641 Englewood, CO 80151-0641 (303) 781-3273) published many
 
  Apple II products such as GNO/ME and Splat!; GNO/ME has been
 
  reclassified into the freely copyable category.
 
 
 
  Ready Access Memory (http://readyaccessinc.com/ ) apparently sells a
 
  number of Apple II related items.
 
 
 
  Redmond cable (206-882-2009) makes and sells all sorts of custom
 
  cables.
 
 
 
  Roger Wagner Publishing, Inc (1050 Pioneer Way, Suite P, El Cajon,
 
  California 92020, 619/442-0522) is still publishing Hyperstudio for
 
  the GS, and Merlin (assembler/disassembler) packages for the Apple II
 
  family.
 
 
 
  Scantron Quality Computers, http://www.sqc.net/ (800-777-3642 or
 
  810-774-7200, 810-774-7740 Tech Support, 810-774-2698 FAX) not only
 
  sells Apple II products, but maintains a list of user groups and
 
  publishes an informative newsletter geared towards educators (called
 
  Enhance). They also published AppleWorks 5.0. To get a QC catalog and
 
  a free subscription to Enhance, just call! Contact QC (on GEnie),
 
  QualityCom (on AOL) or sales@sqc.net.
 
 
 
  Sequential Systems (http://www.sequential.com/ 800-759-4549 or
 
  303-666-4549, 800-999-1717 tech, 303-666-7797 BBS) has many products,
 
  including GS software that reads some (but not all) multimedia
 
  CD-ROMs, VGA display, Memory, SCSI, and other boards for Apple IIs.
 
  Contact inquiries@sequential.com.
 
 
 
  Seven Hills Solution Specialist
 
  (http://www.sevenhills.com/applesoftware/ email: shss@nettally.com,
 
  904-575-0566 phone, 904-575-2015 FAX, 1254 Ocala Road, Tallahassee, FL
 
  32304) publishes the Spectrum Internet Suite (WWW browsing from a GS
 
  and dialup shell account), Graphic Writer III (GS Desktop Publishing),
 
  Independence (Black and White printer drivers for several printers
 
  from the GS) and Spectrum (GS Desktop Telecom program), among other
 
  programs.
 
 
 
  Joe Kohn's Shareware Solutions II (http://www.crl.com/~joko/ 166
 
  Alpine Street, San Rafael, CA 94901-1008, joko@crl.com) publishes a
 
  bimonthly Apple II newsletter, the NAUG (National Appleworks User
 
  Group), the WestCode Software GS software (Pointless, HardPressed,
 
  etc) line, many older and newer games, several HyperStudio and
 
  HyperCard IIGS's 3.5" and CD-ROM collections, many freeware/shareware
 
  disks, and the Harmonie set of printer drivers originally published by
 
  Vitesse.
 
 
 
  Shreve Systems (http://www.shrevesystems.com/ has some Apple II parts,
 
  reconditioned, and other stuff.
 
 
 
  Smart Kids Software (http://www.smartkidssoftware.com/apple.htm email
 
  max@smartkidssoftware.com) has many Apple II software, specializing in
 
  educational titles.
 
 
 
  Software & More (http://members.aol.com/AppleSWHP/APPLE.html 7250
 
  Auburn Blvd Citrus Heights CA 95610 (916) 725-0228, SWMoreTP@aol.com)
 
  carries a number of hardware and software items for the Apple II
 
  series.
 
 
 
  Sun Remarketing, http://www.sunrem.com/ (800-821-3221) also sells used
 
  Apples parts and books.
 
 
 
  Vitesse, authors of the Harmonie series of printer drivers, can be
 
  reached at 248 North Orange Ave. West Covina, CA 91790-2018
 
  (818)813-1270 (818)813-1273 (FAX). Joe Kohn's Shareware Solutions II
 
  has taken over distribution of Harmonie; see above.
 
 
 
  Washington Apple Pi (http://www.wap.org/ 301/984-0300, BBS
 
  (301/984-4070 [12 lines, 9600 and up] and 984-4066 for the 2 line at
 
  2400), info@tcs.wap.org) has an extremely active Apple /// Special
 
  Interest Group. They have 250 PD disks and have funded a new revision
 
  of the OS. Contact Dave Ottalini at 72457.2401@Compuserve.com or at
 
  the email address above.
 
 
 
  Westcode Software (http://www.westcodesoft.com/ ) has mostly moved on
 
  to the Mac world, but their Pointless, TypeWest, and HardPressed
 
  packages for the GS are still being sold by Joe Kohn's Shareware
 
  Solutions II. (see above).
 
 
 
  10.3 Fun hardware add-ons
 
 
 
  ///SSH Systeme, http://users.ids.net/~kerwood/shh.html (Write to: SHH
 
  SYSTEME, Dipl. Ing. Joachim Lange, Bergstrasse 95, 82131 Stockdorf,
 
  Germany) is selling several cards for the Apple II, allowing you to
 
  connect IDE drive(s), PC Floppy drives, or expand a Transwarp GS's
 
  cache. Contact jlange@tasha.muc.de.
 
 
 
  Night Owl (913-362-9898) makes a slide-on battery for ROM 01 GS's. You
 
  need a replacement if the time and system settings go back to their
 
  defaults whenever you turn the computer off.
 
 
 
  Lightning Systems, (414) 363-4282 BBS, P.O. Box 4, Mukwonago, WI
 
  53149-0004 sells a 'Turbo ASP' addon to the Super Serial Card which
 
  lets it communicate at up to 230,400bps.
 
 
 
  Various companies sell cables for the Apple //c; check out Atlaz
 
  Computer Supply (516-239-1854) or LYBEN Computer Systems at (800)
 
  493-5777
 
 
 
  Conversion Technology (801-364-4171) sells a drive that allows you to
 
  hook up cheap IBM 3.5" and 5.25" disk drives to you Apple II.
 
 
 
  Silicon Systems (714-731-7110) makes that 22 pin DIP DTMF decoder chip
 
  that Apple-Cat modem owners are always looking for. Part #: SSI 75T201
 
  - Integrated DTMF Receiver.
 
 
 
  10.4 Periodicals & Books
 
 
 
  The Apple Blossom is published by Steve Cavanaugh; see listing in
 
  section 10.2 above.
 
 
 
  Howard Katz publishes the 'Appleworks Gazette'. 1104 Lorlyn Circle #
 
  2D Batavia, IL 60510.
 
 
 
  Adam Barr ( barr@railnet.nshore.org) and Cindy Field (former
 
  InCider/A+ editor) thought about starting a new (email) Apple II
 
  newsletter, but nothing apparently ever came of that.
 
 
 
  The Byte Works ( http://www.hypermall.com/byteworks/index.html, email
 
  mikew50@aol.com) is one of the few sources for Apple II books full of
 
  technical and programming information.
 
 
 
  A free monthly archive of postings, full of tips, tidbits, etc.,
 
  called GenieLamp has been discontinued. Back archives of it are
 
  available at http://ground.isca.uiowa.edu/apple2/gelamp. For a while,
 
  the edition for programmers (the 'a2pro.*' files in the directory
 
  mentioned) ran at the same time. "The Lamp" is the replacement, and
 
  will be available shortly on the internet after an initial Delphi-only
 
  posting.
 
 
 
  Hyperstudio Network (609-446-3196) is a quarterly newsletter about
 
  HyperStudio. They put out an annual 'Best of HyperStudio' disk of
 
  stacks, and have discounts on HyperStudio accessories. They even do
 
  some teacher-oriented stuff.
 
 
 
  Juiced.GS is another Apple II newsletter started by Max Jones. As of
 
  9/4/96, a 1-year's subscription is $14. For more information, email
 
  Max at m.jones145@genie.com, or write to him at Max Jones, Juiced.GS,
 
  2217 Lakeview Drive, Sullivan IN 47882.
 
 
 
  Scantron Quality Computers (previously mentioned above) also publishes
 
  periodicals, such as II Alive
 
 
 
  Shareware Solutions II (166 Alpine Street, San Rafael, CA 94901) is a
 
  new Apple II magazine with the latest scoops, written by long time
 
  Apple II writer Joe Kohn. Mail joko@crl.com for details. You can also
 
  check out his WWW homepage at http://www.crl.com/~joko/ssii.html
 
 
 
  Softdisk and Softdisk GS (800-831-2694 or 318-221-8718) were monthly
 
  disk magazines containing a variety of software (PD/SW, clip art,
 
  reviews, etc). Softdisk and Softdisk GS are no longer published, but
 
  you may still be able to purchase back issues on 5.25" or 3.5" disks.
 
  Softdisk GS is available only on 3.5" disks. See
 
  http://www.softdisk.com
 
 
 
  Kingwood Micro Software publishes Texas II, a newsletter and disk for
 
  users of AppleWorks. 2503 Sherbrook Lane McKinney, Texas 75075.
 
 
 
  10.5 Misc Resources
 
 
 
  If you need a IIc upgrade, it used to be free, but that has expired.
 
  Try a few Apple dealers or call Apple to seek help. The number is
 
  1-800-767-2775 (SOS-APPL).
 
 
 
  Sequential Systems ( http://www.sequential.com, 800-759-4549 or
 
  303-666-4549, 800-999-1717 tech, 303-666-7797 BBS) have taken over
 
  CVTech's products.
 
 
 
  Larry Beyer (312-735-9010) likes to fix InnerDrive hard drives.
 
 
 
  Apple has a toll-free customer assistance line for handling sales
 
  questions and user concerns. This toll-free line is not designed to be
 
  a technical support hotline, but instead is an extension to the
 
  comprehensive Apple customer relations effort. The Customer Assistance
 
  Center is open Monday through Friday from 6 a.m. to 5 p.m. Pacific
 
  time by dialing 1-800-776-2333.
 
 
 
  
    _________________________________________________________________
+
Copy ][+ may be a great program for making the one personal backup copy of a piece of software that you are legally entitled to, but its file copy, delete, and directory sorting functions will corrupt a disk when used on a directory with GS/OS 'forked' files. (Pretty much all of the system software is forked, as are most GS applications). Do NOT use it on disks or HD partitions with such files. ProSEL 8 or 16 can repair some of the damage done, and provide safe disk and file utilities.
  
From: tdiaz-apple2-org (Tony Diaz)
+
If the mouse cursor wipes out everything it moves over, you may have a software conflict with Closeview. To deactivate it, from within the Finder, open the 'System' folder on your boot disk, then the 'System.Setup' folder. Find the icon named 'Closeview', and click once on it. Then, from the 'Special' menu, choose 'Icon Info...'. A window will open up, with a check box for 'Inactive' in the top right. After setting it to inactive, reboot. You can do the same thing for any other Desk Accessory, Control Panel (CDev), or Init (in the System.Setup folder, should you decide not to want to run it.
Newsgroups: comp.sys.apple2,comp.answers,news.answers
 
Approved: news-answers-request@MIT.EDU
 
Followup-To: comp.sys.apple2
 
Subject: comp.sys.apple2 Frequently Asked Questions (FAQ) Part 1/4
 
  
Archive-name: apple2/faq/part1
+
Easy Access also can and does cause lockups with programs, especially on the ROM 01. Deactivate it just like you did with the Closeview program-- it's in the same folder.
Posting-Frequency: monthly
 
Last-modified: August 21 2007
 
Version: 5.1.38
 
URL: http://apple2.info/wiki/index.php?title=CSA2_FAQ
 
  
The next section is the Frequently Asked Questions (FAQ) posting of
+
If you are getting an annoying message about Appletalk not being available at boot, but you're not using Appletalk in general, disable the 'SCC.Manager' file in the drivers folder inside the system folder on your boot disk.
the comp.sys.apple2 newsgroup. Copyright (c) 2007 by Tony Diaz
 
(email: tdiaz-at-apple2-dot-org), all rights reserved. This document
 
can be freely copied so long as 1) it is not sold, 2) any sections
 
reposted elsewhere from it are credited back to this FAQ with the
 
FAQ's copyright info and official WWW location
 
( http://apple2.info/wiki/index.php?title=CSA2_FAQ) left in place.
 
  
This may not be the latest version of this FAQ-- this is an archived
+
Missing features of system 6? Perhaps you just used easy install, which doesn't install all the bells and whistles. Try clicking on the 'Custom' install (versus the easy install) in the Sys 6.0 installer and add the nifty things like Calculator, Find File, HFS FST, etc. You can also read the Shortcuts file on the 'SystemTools2' disk for some great keyboard shortcuts.
copy. For that, drop by http://apple2.info/wiki/index.php?title=CSA2_FAQ
 
  
This FAQ may not be sold, bundled on disks or CD-ROMs, reprinted in
+
Finder 6.0 icons that match by name and have a leading wildcard require uppercase letters. For example, a name like "*.txt" never matches, but "*.TXT" works fine (it matches regardless of a file's actual capitalization). (This was accidental; the 5.0.4 Finder did not care about capitalization in icon files.)
magazines, books, periodicals, or the like without prior consent from
 
the maintainer, Tony Diaz. Exceptions are explicitly granted for
 
Juiced.GS and _The_Lamp. Email me for permission otherwise.
 
  
Big thanks to Nathan Mates, the previous maintainer of this
+
Two misconceptions about System 6: The A2.RAMCARD is not for the GS's /RAM5. It only works with "slinky" (i.e. standard slot) cards. Also, the DOS 3.3 FST has nothing to do with MS-DOS.
comp.sys.apple2 FAQ, for allowing it to live on after his departure
 
and anyone who took up that mantle before him.
 
  
  
--- Begin part 3 of 4
+
== Tips & Hints ==
                                     
 
How do I get files off the net? 8/26/96
 
  
  Quick summary:
 
  1: Make sure you know how to download files from ftp sites
 
  2: Make sure you have a Binscii decoder
 
  3: Make sure you have a Shrinkit unpacker
 
  4: Unpack with the programs
 
 
 
  And, in more detail, starting with a word of explanation:
 
 
 
  [There used to be details about older Apple II packing programs in the
 
  FAQ, but as they're pretty much never used anymore, the info on them
 
  has been relegated to the 'obsolete' section of the comp.sys.apple2
 
  FAQ at http://www.visi.com/~nathan/a2/faq/csa2.old.html]
 
 
 
  5.1 What are Binscii & Shrinkit, and why do I need them? 8/26/96
 
 
 
  Shrinkit was written by Andy Nicholas to be able to take multiple
 
  files or disks and compress them into one file. This allows a authors
 
  to distribute programs, documentation, and anything else as one
 
  complete file. It is analogous to (but NOT the same as) Stuff-It or
 
  [PK]ZIP for Macs and IBMs. Shrinkit comes in many different forms, as
 
  is noted in the section on downloading it.
 
 
 
  Binscii is a method of turning Apple II files into pieces that can be
 
  safely transmitted by the internet, such as usenet and email, and
 
  restored to the Apple II file later. It is used for two major reasons:
 
  1) Since it splits files up into manageable pieces, it lets huge files
 
  be transmitted without fear of being cut short. 2) Since it translates
 
  files to strictly printable characters, mediums that cannot safely
 
  send binary files (i.e. files put through Shrinkit) such as email and
 
  usenet can send binscii'd files.
 
 
 
  Binscii is similar to the unix 'uuencode' encoding, but it is not
 
  identical, and far superior. It allows Apple II filetype information
 
  to be restored when the file is unpacked. Secondly, binscii is usually
 
  not concerned about email or news headers (it ignores them when
 
  unpacking), and also can unpack the various pieces of a binscii'd file
 
  in any order, and the original file will be be intact as long as all
 
  the pieces were unpacked. Finally, you do not have to rejoin all the
 
  binscii pieces into one file before unpacking.
 
 
 
  Why these two programs are so necessary in downloading is the
 
  following: pretty much all Apple II programs are first compressed with
 
  Shrinkit, and if they are to be sent via email or to
 
  comp.binaries.apple2, the shrunk file is then binscii'd. To unpack,
 
  you will need to first un-binscii the file, if appropriate, and then
 
  un-Shrink it.
 
 
 
  Ok, fine. What do Binscii and Shrinkit files look like?
 
 
 
  If you are given a file, first look at the end of the filename. If it
 
  ends in ".BSC" or ".BSQ" (no quotes, and upper/lower case doesn't
 
  matter), you most likely have a binscii file. Shrinkit files tend to
 
  end in ".SHK", but ".BXY" is also used.
 
 
 
  If that isn't helpful, or you have a file without a name, then take a
 
  look at the first few lines of content. After any optional news or
 
  email header, a binscii file should look like this:
 
  
FiLeStArTfIlEsTaRt
+
The AppleShare logon programs have always looked for a folder named "Mail" inside your user folder whenever you log onto a user volume. If there's any items in there, they present a dialog that says "You have mail." With the Sounds control panel, you can make it play a sound of your choice then.
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789()
 
GSOMEFILE.SHK  AQhmAAAAA8)4MIAI02DA9ARMQEDtAQhmAIVZ
 
gYITA6u7xADA0MjM3YTNBlDOENkQwYURzITM2UDN5gzNDJUQGVERyEDM1QzM4cjN
 
CFUOFR0QxAjR0MjM3YTNBlDOENkQwAQRzITM2UDN5gzNDJUQGVERyEDM1QzM4cjN
 
  
  The first two lines are constant throughout all binscii files; the
+
If you don't want to see your icons on boot, set bit 1 (i.e. the 2nd LSB) of BRAM Location $5F. Be sure not to mess with the other bits. Use the toolbox calls!
  third contains the filename ('SOMEFILE.SHK' here) and then the encoded
 
  file.
 
 
 
  On the other hand, a .SHK file cannot have any news or email header,
 
  and has only about 6 characters at the start (not all viewable on a
 
  normal screen, especially non-Apple IIs) that identify it. Thus,
 
  trying to look at the first few lines is pointless.
 
 
 
  Finally, you can always try to unpack the file, as the binscii and
 
  Shrinkit programs will notify you if the file is not in the format
 
  they can unpack. As files are always binscii'd last, you should thus
 
  try and unbinscii an unknown file first, then try to unshrink it.
 
 
 
  Enough technical discussions, now on to the specifics of where and how
 
  to get binscii and shrinkit running on your system.
 
 
 
    _________________________________________________________________
 
                                     
 
5.2 Where can I get Apple II software and info on the net? 3/2/97
 
  
  If you're looking for an OS (operating system) for your Apple II,
+
The FinderExtras folder goes in the same folder as the Finder (generally the System folder).
  there's pretty much no way to download it and write it to an Apple II
 
  disk without an Apple II handy. However, there are other ways of
 
  getting it; see section 7.2 of this FAQ.
 
 
 
  [A quick note about URL notation: For those of you with full net
 
  access, you can run a web browser (like Lynx if you are dialed in from
 
  your Apple), which will understand URLs directly. Otherwise, ignore
 
  the 'http:' ones and see the next section on how to use the FTP ones.)
 
 
 
Hint:
 
      ftp://apple2.caltech.edu/pub/apple2
 
            ^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^
 
                Hostname        Directory
 
  
  Major FTP sites and mirrors:
+
If you don't like yellow folders in the Finder you can change the byte at offset +65 in the Finder resource with type $C001 and ID 1. Change the $E0 to whatever you want (the first digit is the default folder foreground color, and the low nibble is for the outline color). Only folders that do not already have a color recorded in a Finder.Data file get the default color.
 
 
    * ftp://apple2.caltech.edu/pub/apple2 Maintained by Dan Zimmerman,
 
      this large and well organized Apple II Archive is the best place
 
      to look for sofrware.
 
    * ftp.apple.com, dts/aii Apple's main ftp site. Get Technical Info,
 
      ProDOS 8 and GS System Software, etc. here.
 
    *
 
      ftp://mirror.apple.com/mirrors/Apple_SW_Updates/US/Apple_II/HyperCa
 
      rd_IIGS_1.1/ Hypercard GS. This is also available at
 
      ftp://ftp.info.apple.com/Apple_Support_Area/Apple.Software.Updates
 
      /US/Apple_II/HyperCard_IIGS_1.1/
 
    * ftp://ftp.gmd.de/if-archive/games/appleII/eamon/guild/original/
 
      Eamon (text-based RPG system for Apple IIs) adventures in DOS 3.3
 
      or ProDOS format.
 
    * ftp://ground.isca.uiowa.edu/apple2 We (The Apple II users of the
 
      internet) paid a good chunk of money for this drive, so it's the
 
      biggest, and may have the best selection, but the worst
 
      organization and disregard of legality, due to blind association
 
      with a pirate. The WWW interface at
 
      http://ground.isca.uiowa.edu/apple2/ is almost always available.
 
    * ftp://apple2.archive.umich.edu/archive/apple2 Another large Apple
 
      II archive. Once again, the WWW interface at
 
      http://www.umich.edu/~archive/apple2 can be less overloaded.
 
    * ftp://ftp.hypermall.com/pub/gno or
 
      http://www.gno.org/pub/apple2/gs.specific/gno/base204/ . GNO/ME
 
      2.0.4 distribution.
 
    * http://www.openix.com/~jac Archive of all postings to
 
      comp.sources.apple2.
 
    * ftp://names.wvu.edu/pub/apple3 - Apple III stuff
 
     
 
  And for information, here's some of the major resources:
 
 
 
    * http://www.visi.com/~nathan/a2/faq/csa2.html- Hypertext version of
 
      this FAQ, and even more FAQs on all sorts of questions and
 
      subjects
 
     
 
    http://delphi.com, the best place for quality flamefree Apple II
 
  people and discussions.
 
 
 
    http://www.visi.com/~nathan/a2/faq/asoft.html Applesoft Basic
 
  reference FAQ.
 
 
 
    http://www.visi.com/~nathan/a2/faq/dos.html Apple II DOS & Commands
 
  FAQ.
 
 
 
    http://www.hypermall.com/History What is the history of the various
 
  models in the Apple II series?
 
 
 
    http://www.gno.org/~gno/FAQ.html comp.sys.apple2.gno FAQ [For the
 
  GNO/ME multitasking environment for the Apple IIGS]
 
 
 
    http://www.visi.com/~nathan/a2/faq/pinouts.html Pinouts for many
 
  different Apple II connectors
 
 
 
    http://www.visi.com/~nathan/a2/faq/snd.mus.html Apple IIGS sound and
 
  music capabilities.
 
 
 
    http://www.visi.com/~nathan/a2/faq/sys6files.html Reference of GS/OS
 
  System 6's filestructure, with notes as to which files are required,
 
  etc.
 
 
 
    http://www.visi.com/~nathan/a2/faq/asoft.html Flopticals and Apple
 
  IIs.
 
 
 
    http://www.visi.com/~nathan/a2/faq/asoft.html CDROMs and Apple IIs.
 
 
 
    http://www.teraform.com/~lvirden/Misc/apple2-languages.txt Apple II
 
  Programmmer's Catalog of Languages and Toolkits
 
 
 
    http://www.visi.com/~nathan/a2/faq/zip.html Upgrading and modifying
 
  Apple IIGS accelerators.
 
 
 
    http://www.crl.com/~joko/ssii.html - ShareWare Solutions II Homepage
 
 
 
    http://www.tals.dis.qut.edu.au/staff/willie/ Willie Yeo's verified
 
  list of commercial Apple II products reclassified to be publically
 
  distributable.
 
 
 
    http://www.visi.com/~nathan/a2/index.html - Nathan Mates's Apple II
 
  Links. Lots of 'em.
 
 
 
    http://www.visi.com/~nathan/a2/bbs.html - Mike Shecket's BBS listing
 
 
 
  Other FTP Sites:
 
 
 
    * ftp://ftp.sheppyware.ml.org/Public-FTP/ Eric Shepherd's Apple II
 
      software.
 
    * ftp://ftp.ms.uky.edu/pub/appleII Mostly very old Apple II software
 
    * ftp://ftp.cc.utexas.edu/gifstuff/apple GIF viewing software for
 
      Apple IIs only. (And outdated. Major sites listed above have
 
      better selections)
 
    * ftp://info2.rus.uni-stuttgart.de/afs/umich.edu/group/itd/archive
 
      Looks like a umich mirror again
 
    * ftp://syr.edu/software/kermit/appleII Kermit sources for the Apple
 
      II.
 
    * ftp://watsun.cc.columbia.edu/kermit/a Kermit stuff in forms that
 
      look unusable to Apple II users.
 
     
 
  Archives of C.S.A2 Newsgroups:
 
 
 
  Dejanews, http://www.dejanews.com, is an excellent searchable archive
 
  of pretty much all major usenet groups, including all of the Apple II
 
  newsgroups. It's only good back to about March 1995 as of 8/31/96, but
 
  they may be trying to extend that back.
 
 
 
  Other, more limited archives:
 
===============================
 
wuarchive.wustl.edu      /usenet/comp.sources.apple2 (complete!)
 
                        /usenet/comp.binaries.apple2
 
?ftp.tohoku.ac.jp        /pub/news/comp.binaries.apple2
 
hp4nl.nluug.nl          /pub/newsarchive/comp/sources/apple2 (incomplete)
 
mcsun.eu.net            /pub/newsarchive/comp/sources/apple2 (incomplete)
 
nic.funet.fi            /pub/archive/comp.sources.apple2 (complete?)
 
relay.cs.toronto.edu    /pub/lists.1989 (1989 only)
 
  
  If you have a Shell account, you can use 'archie' to find ftp sites
 
  with a particular file.
 
 
 
    _________________________________________________________________
 
                                     
 
5.3 How do you download files off the net?
 
  
  This is important because once you're on the internet, most of the
+
== If you have a RamFAST ==
  files are available only on 'ftp' and www sites. ('ftp' stands for
 
  File Transfer Protocol, and www stands for the World Wide Web, but all
 
  you need to know is where to get Apple II files from. See the section
 
  above for a list of ftp sites.)
 
 
 
    1. (For ProLine users) Get files to your host
 
        1. Dial up your host and log in.
 
        2. I'm not familiar with ProLine, so I'll be vague here. Just go
 
            into the files section and look... Anyone wanna clue me in?
 
    2. (for those with a Shell account) Get files to your host
 
        1. Choose an FTP site from the FAQ
 
        2. At your UNIX prompt, type "ftp _____" (fill in hostname)
 
        3. At the "Login:" prompt, type "anonymous" (or "ftp" if you are
 
            a bad speller like me ;)
 
        4. Type in your e-mail address when prompted for a password.
 
        5. Type "bin" unless you are only getting text files
 
        6. Type "cd ______" (directory) to move to the right directory.
 
        7. type "ls" to see a list of files.
 
        8. Locate each file (more "cd ___"'s and "ls"). Also, "cd .."
 
            will move up a directory in the tree.)
 
        9. use "get ______" (filename) to get it
 
        10. When you are done using FTP, type "quit"
 
    3. From a WWW browser, most browsers are not set up to download .SHK
 
      files in binary, which will make them impossible to unpack. There
 
      are some solutions to this. Dan Zimmerman has made the Apple II
 
      archive at Caltech automatically send files in binary mode; go to
 
      http://apple2.caltech.edu/a2archive.html
 
      If you are using Lynx, when the cursor is on the file to download,
 
      you can hit 'd' to download the file, which for most people forces
 
      a binary download. [Lynx has too many versions with the same
 
      version 'number' and possible configurations to be able to list
 
      which ones will work.]
 
      Using most WWW browsers under unix (Netscape, Mosaic, lynx, maybe
 
      some others) you can try editing the file '.mime.types' (no 's) in
 
      your home directory on most unix systems. (Contact your local
 
      sysadmin or guru for help on unix editors). Add the following
 
      lines to the file:
 
  
application/x-Shrinkit shk SHK sdk SDK
+
The RamFast and ProDOS 2.0.1 both try to do re-mapping of drives to unused slots. This can cause problems, mostly when launching and returning from ProDOS 8 applications (crashes or wants you to insert disk). Solution: Configure the RamFast not to re-map. If you have a RamFAST with a ROM revision less than 2.01a, you need to get a newer ROM from Sequential Systems. Otherwise, V2.01c allows setting Slot Priority Allocations to 0 which will let ProDOS deal with them. V3.0 allows you to choose between RamFast mapping (works now) and ProDOS 8 mapping. If you can't wait, you can Patch ProDOS 2.0 not to re-map slots. Look for "10 BF C9 A5 D0 07" and change the $A5 to $00 (should be byte $1A3 in the 5th block of the file). Hack at your own risk.
application/x-BinaryII bny BNY bqy BQY bxy BXY
 
  This will work for most files downloaded with lynx, netscape, and
 
      mosaic. Non-unix browsers can do similar things, but you'll need
 
      to read the documentation on them.
 
    4. From email or comp.binaries.apple2, the files are pretty much
 
      always in BINSCII format, so you do not need to worry about binary
 
      downloading. Simply save the email or news articles to disk (most
 
      things do have multiple parts, so be sure to get all of them), and
 
      download that to your Apple II. You can keep the posts as separate
 
      files, no need to paste them all together when saving or
 
      downloading. For a multiple part binscii file, the order in which
 
      you unpack them does not matter as long as you unpack every part.
 
    5. Get files to your Apple II
 
      See the next section on transfering Apple II files.
 
     
 
  5.4 How do you transfer Apple files to/from other personal computers?
 
 
 
  Normally, you cannot stick a 5.25" disk in a non-Apple II machine and
 
  have it read it. This is because the disk writing formats are
 
  different at a hardware level, and no software exists (or will exist)
 
  to let a PC read an Apple II 5.25" drive. However, with rarer addon
 
  hardware, you can bridge the gap. This has been an insolvable problem
 
  for nearly 15 years; if it could be solved in software, such a thing
 
  would exist.
 
 
 
  That being said, here's a list of ways that do work:
 
 
 
  5.5 How do I transfer DOS 3.3, Pascal, CP/M files?
 
 
 
  Unless you have a null modem (see below) and a comm program for the OS
 
  in question, you'll most likely have to use a real Apple II to
 
  transfer the files to an OS that a lot more systems can read, such as
 
  ProDOS.
 
 
 
  The ProDOS system software, the DOS 3.3 FST (optional part of GS
 
  System 6.0 and 6.0.1), and Copy ][+ can all read and convert files on
 
  DOS 3.3 disks to ProDOS disks; all but the DOS 3.3 FST can write from
 
  ProDOS to DOS 3.3 disks. All data files should translate fine, but any
 
  program requiring a specific OS will probably not run under the wrong
 
  OS.
 
 
 
  For translating between ProDOS, CPM, Pascal and DOS 3.3, try the
 
  program Chameleon. You have to use the 'force disk as ProDOS' option
 
  to copy to/from your hard drive.
 
 
 
  ftp://apple2.archive.umich.edu/apple2/8bit/util/chameleon.bsq
 
 
 
  Once the file is on a ProDOS disk, you generally have a lot more
 
  transfer options available.
 
 
 
  5.6 How do I transfer files by [null] modem?
 
 
 
  This is probably the most accessible option; it can be done by an
 
  Apple and any other computer as long as both have serial ports,
 
  cable(s) to go between them, and communications software on both
 
  sides.
 
 
 
  Modems allow you to transfer computer data over phone lines; a null
 
  modem essentially yanks the middleman of a phone. Null modem cables
 
  (which are identical to serial printer cables) are essentially a cable
 
  which plugs into the serial port of two computers, and is wired such
 
  that when one computer sends, the other receives, and vice versa. With
 
  a communications program that supports file transfer on both ends, you
 
  can send files from one side to the other. There are a few companies
 
  selling null modem cables and the like; see the appropriate section of
 
  this FAQ- 10.2 for their info.
 
 
 
  For those who haven't picked a program to download with, here are the
 
  better Apple II programs listed alphabetically; for other systems,
 
  you'll have to find a comparable program. All of the non-commercial
 
  programs are available from FTP sites. If you don't have a comm
 
  program already, your best bet is to have someone mail you one on a
 
  disk or buy ProTerm. (See resources).
 
 
 
Program  Comp Emulations    Protocols            Note
 
---------|----|---------------------------------------------------------------
 
ANSITerm  GS$ color ANSI, PSE X,Y,Z-modem          Editor, scrollback, etc.
 
Agate      E  mono ANSI      X,(Y,Z D/L only)    Unpacks ZIP, buggy
 
ColorTerm  GS  color ANSI      X-modem              Desktop based
 
CommSys    E  none            X-modem              Works on ][+
 
FreeTerm  GS  none            X-modem              Desktop based
 
GSVT      GS  VT-100          none                Desktop
 
GTerm      GS  color ANSI      none                Written in BASIC/ML
 
GenComm    GS  none            none                Text, Shell Compat.
 
Kermit-65  E  VT-100          Kermit, X-modem      Hard to use,Works on ][+
 
MegaTerm  GS  color ANSI      none                ProDOS 8
 
PTP        E$, VT-100          X-Modem, (Y-mdm D/L) From Quality Computers
 
ProTerm    E$ PSE, VT-100    Kermit, X,Y,Z-modem  From InSync
 
SnowTerm  GS  VT-100 (+)      none                Desktop based
 
Spectrum  GS$  ANSI, VT100, PSE, Viewdata  Kermit,X,Y,Z Modem  GS Desktop Prog
 
TIC        E$  VT-100 (+)     X-modem              Small, Scripting.
 
Telcom    GS  VT-100, PSE    X, (Y D/L only)      Shell compat
 
Z-Link    E  VT-100          X-modem              Good.
 
----------Key:---------
 
| Key: $ = A commercial program  + = And other obscure ones
 
| Computer:  E = works on GS and //e, GS = only works on GS
 
| D/L = Download from other computer
 
---
 
  
  PTP = Point-To-Point. I don't think it's being sold anymore. Anyone
 
  know? See the resources section for where to buy the commercial
 
  programs.
 
 
 
  Once you are set up with a comm program on both ends, with a modem,
 
  here's how to send files:
 
    1. Find out what file transfer protocols your Apple communications
 
      package supports. (see below for a list)
 
    2. On your local comm program, set your file transfer type to Text
 
      (TXT) or Binary (BIN) depending on what type of file you are
 
      downloading. If there is an option to "strip incoming linefeeds",
 
      try turning it on.
 
    3. Get your host to send you the file. I don't know about ProLine,
 
      but UNIX users can use these commands:
 
      For Z-Modem: "sz ___ ____ ____" (file names)
 
      For X-Modem: "sx ____" (one at a time)
 
      For Kermit: "kermit", then "put _____" (filename)
 
      Z-Modem is by far the fastest of the three; if you are getting
 
      random connection errors, you may need to do "sz -e ___ ____ ____"
 
      to force a safer (but slower) xfer method.
 
    4. If needed, tell your local communications program to Receive. You
 
      must do this quickly, or the other host will give up trying to
 
      send the file.
 
    5. Write down the full pathname of the files you downloaded and where
 
      you put them. There will be a quiz later. Pathnames look like
 
      "/DISK/DIR/FILE.NAME"
 
      Note: If something goes wrong, hit ESC, Ctrl-X or Ctrl-C 3 times.
 
      If you can't get one protocol to work, try the next one down.
 
      Z-modem is much faster than the others. You will want to find a
 
      program that supports it.
 
     
 
  With a null modem, it is similar. First, you need to tell both sides
 
  that they are online. Reading the manual is strongly encouraged! This
 
  is easy for some programs, where you can just start them or set an
 
  option, and they're running. Other, like Windows 95's Hyperterminal,
 
  are almost dead set on dialing a modem first. You'll also need to set
 
  both sides to communicate at the same speed and connection parameters
 
  (8 bits, no parity, 1 stop bit, aka '8N1' is customary). When you've
 
  got that done successfully, you can type on either computer's keyboard
 
  and have it appear on the other's screen.
 
 
 
  Once the null modem connection is set up, you can transfer files. From
 
  the receiving end, issue the command(s) to receive a file in some
 
  protocol, such as Kermit, X-Modem, or Z-Modem. Then, from the sending
 
  side, issue the command(s) to send a file in that same protocol. The
 
  file should then be transferred. (As above, reading the manuals and/or
 
  documentation for the software used is highly encouraged).
 
 
 
  A very nice null modem is the CrossWorks product, which has been taken
 
  over by Sequential Systems. It is a null modem cable as well as Apple
 
  II and IBM PC software that lets you translate certain types of files
 
  between both sides, such as Appleworks files, and keep the formatting
 
  roughly intact. See the vendors lists below.
 
 
 
  5.7 How do I read/write files from other platforms with an Apple II?
 
 
 
  As noted above, Apple II drives write differently at a hardware level
 
  than IBM PC drives; you will not be able to write to IBM PC 5.25"
 
  disks or 720K 3.5" disks from Apple IIs unless you have special
 
  hardware.
 
 
 
  If you have an Apple //e, the Bluedisk from ///SHH systeme, which lets
 
  you plug in IBM PC 3.5" and 5.25" drives to an Apple II; you should be
 
  ablt to transfer files with standard file copy programs. Another
 
  option is the AE PC Transporter card, which had PC disk drive support
 
  for 5.25" and 3.5" drives, as well as the software to translate
 
  between the two. You also get the ability to run a number of IBM PC
 
  programs on your Apple.
 
 
 
  If you have a 3.5" drive on your system capable of reading 800K or
 
  1.44MB disks, you can read Mac (HFS) disks of the right size directly
 
  with some pieces of software:
 
  ftp://apple2.archive.umich.edu apple2/8bit/util/a2fx.8.bsq
 
 
 
  ftp://apple2.archive.umich.edu/apple2/8bit/util/hfslink.b3.bsq
 
 
 
  Null modem's also an option if your Apple II has a serial port. Such a
 
  port is built into the //c, IIc+ and IIGS; you will need to purchase a
 
  card such as the Super Serial Card to add such functionality to a ][,
 
  ][+ or //e.
 
 
 
  5.8 How do I read/write files from other platforms with an Apple IIGS?
 
 
 
  With support for both 3.5" and 5.25" drives, the Apple IIGS is the
 
  best all-round platform for transferring files between various setups.
 
  First, all of the Apple II programs and methods are available to it;
 
  see the section just above this for those.
 
 
 
  With GS System 6.0 and 6.0.1, the GS gained the ability to read and
 
  write Macintosh 800K and 1.44MB floppies from within all programs, not
 
  just the dedicated transfer programs mentioned above for pre-GS
 
  machines. (1.44MB disks require some additional hardware, such as the
 
  Apple 1.44MB Superdrive and Superdrive controller, the Bluedisk, or
 
  SCSI Floptical drives). Use the System 6 installer (select 'Custom'
 
  install to get the list of addons) to install the HFS (Macintosh) FST
 
  on your boot disk, then reboot to load it. It may be a bit of a
 
  squeeze to fit the HFS FST and such on a 800K boot disk, and GS System
 
  6.0/6.0.1 pretty much requires at least 1-1.25MB RAM to do stuff.
 
 
 
  System 6.0.1's optional MS-DOS FST allowed read-only (not write)
 
  access to MS-DOS formatted disks, though disks with Windows 95's VFAT
 
  extended names will not have the long names displayed. The GS's normal
 
  800K drives are not capable of reading MS-DOS 720K or 1.44MB disks
 
  directly; you will need to get a 1.44MB capable drive, as listed in
 
  the paragraph above.
 
 
 
  For the ability to write to MS-DOS disks, you will need Peter Watson's
 
  (email: paw@acslink.net.au) MSDOS utilities (latest version is 2.30),
 
  which can read/write MS-DOS formatted disks, both FAT (pre-WIN95) and
 
  VFAT (WIN95) disks, including Zip disks. It's not currently usable
 
  from within the Finder or other programs, but you need a program shell
 
  such as that included with The Byteworks' Orca series, Procyon's
 
  GNO/ME, ProSEL-16's shell, or the minimal shell included in the
 
  msdostools package.
 
 
 
  ftp://ground.isca.uiowa.edu/apple2/apple16/utils/MSDOS.util/MSDOS.TOOL
 
  S.SHK
 
 
 
  System 6.0 also added read-only support for Dos 3.3 and Pascal 140K
 
  disks. The Pascal FST in System 6.0.1 (and probably 6.0 also) will not
 
  recognize disks with legal punctuation in the disk name; Nathan
 
  Mates's GUPP program fixes that. See the System 6.0 mini-FAQ in this
 
  FAQ for details on where to download GUPP.
 
 
 
  5.9 How do I read/write Apple II files from a Mac?
 
 
 
  If you can read/write Apple II 3.5" disks, Macs can usually read/write
 
  to them, but please note the many quirks noted below. Apart from the
 
  Apple //e emulation card (see below), Macs never really had 140K 5.25"
 
  support. Using a null modem is almost always an option; see above.
 
 
 
  With Mac System 7.5 and up, the Control Panel 'PC Exchange' lets
 
  inserted ProDOS and MS-DOS disks appear on the desktop and copy files
 
  to and from them, making the procedure rather simple. Before 7.5
 
  (starting somewhere in Mac System 5 or 6 series), the program 'Apple
 
  File Exchange' was bundled on the system disks; it could manually (and
 
  very slowly) copy individual files, but only from within Apple File
 
  Exchange. Consult the system software disks for your Mac if you can't
 
  find these programs.
 
 
 
  Macs downloading to Apple II disks to be read by ProDOS 8 applications
 
  is usually not an issue of directly dragging a downloaded file to the
 
  destination disk. Despite the claims of 'compatability' or 'ease of
 
  use', you're likely to need a special program to help to get a ProDOS
 
  8 program such as BASIC.SYSTEM for Binscii, Shrinkit 3.4, Appleworks,
 
  etc., to read the files. [GS/OS can deal fine with the additions to
 
  the file, but if you're trying to get the ProDOS 8 version of binscii
 
  running, that is no help.] The usual symptom of this problem is a
 
  'FILE TYPE MISMATCH' error on trying to read the file.
 
 
 
  It is reported that the Mac program 'ProTYPE' can be used as a helper
 
  app to clean up the crud Macs add to files before copying them to an
 
  Apple II. There was also another program to do the same, but it
 
  disappeared recently from the net, which is apparently "normal" for
 
  Mac ftp sites. ProTYPE is currently available online (at an Apple II
 
  based site, so it hopefully won't disappear like the last rather
 
  useful program) at
 
  ftp://ground.isca.uiowa.edu/apple2/Mac/ProTYPE.hqx
 
  Consult the various Mac FAQs for information on how to download and
 
  use Mac programs. See section 1.3 of this FAQ for references on
 
  finding other FAQs.
 
 
 
  Some have said that you can apparently change the type and creator to
 
  'TEXT' and 'pdos', before copying it to the ProDOS disk-- that'll
 
  prevent it from adding the resource fork when writing to a ProDOS
 
  disk. Others claim that won't do the trick for them.
 
 
 
  Once you have the ability to download .bsq files and unpack them,
 
  there are some Apple II files to remove forks. [These files are packed
 
  with Binscii. If you don't have binscii because it's got a resource
 
  fork on it, you can't use these fork removers. Thus, you'll need to
 
  deal with it on the Mac end at first.]
 
 
 
  HFS.LINK, listed above can apparently read out the data from either
 
  fork; there are also the programs ConvertForks 1.0 or ForkSplit 0.5.
 
 
 
  Also, the Apple //e emulation card (available for a few models of
 
  Macs-- see the section on it) allows you to plug in a real Apple II
 
  5.25 drive, and read files off of it.
 
 
 
  5.10 How do I read/write Apple II files from an IBM PC?
 
 
 
  IBM PC drives operate differently from Apple II drives at a hardware
 
  level; there is NO software to overcome that. The only way to bridge
 
  the gap with only a PC or an Apple II is by using (rare) addon
 
  hardware. [Technical details: PCs use MFM disk encoding; Apple IIs use
 
  GCR. The disk controller card does the decoding of the bitstream, and
 
  if it's in the wrong format, it'll mess up the bits before software
 
  can get anywhere near it. Thus, a new disk controller card is a bare
 
  minimum.]
 
 
 
  If you have a Macintosh and access to an Apple II with 3.5" disks
 
  (such as most GSs), you can copy the files to a ProDOS disk and let
 
  the Mac read that disk. It can then copy them to a MS-DOS disk with
 
  the same software that read the ProDOS disks; see above for Mac
 
  specifics.
 
 
 
  Null modem is probably the best method; as noted above, the Crossworks
 
  product from Sequential Systems is a good product that lets you
 
  transfer and translate certain Apple II and IBM PC file formats.
 
 
 
  There's supposedly a program that reads 1.44MB ProDOS disks on a PC
 
  (which the PC does support), but you need the ability to write such
 
  disks from the Apple II side anyhow.
 
 
 
  There are a few rare hardware boards that you can plug into a PC and
 
  get it to access Apple II disks; the Trackstar Plus and Quadram boards
 
  are reported to be usable in IBM PCs. (Quadram's Quadlink reportedly
 
  only supports the IBM PC XT and older; the Trackstar Plus works well
 
  in any PC with space for a very full-sized ISA board and VGA
 
  capabilities) Neither is available new anymore, and can command a
 
  premium now on the used market, as IBM PCers who sold off their Apple
 
  IIs realize the follies of their ways. :)
 
 
 
  5.11 How do I download and unpack binscii?
 
 
 
  [If you'd rather skip this and most of the next step, Steve Cavanaugh
 
  has a disk containing this, Shrinkit 3.4, and many other useful
 
  programs. See the Resources section (10.2) below.]
 
    1. Binscii has many programs that can unpack it, but if you have none
 
      of them, you will need to first get 'BINSCII.TXT', the only
 
      binscii program that can be transferred without any of the others
 
      or Shrinkit. [Spectrum 2.1 and later can also unpack Binscii, so
 
      if you have a GS and want to purchase this program for general
 
      telecom use, that's an alternative.] After you have this binscii
 
      program and Shrinkit, you can unpack other binscii decoders.
 
    2. There are non-Apple II Binscii programs (sciibin is available in
 
      source code form ready to be compiled on unix and other
 
      platforms), should you desire, but to download and unpack
 
      Shrinkit, you will almost certainly need a minimal Binscii decoder
 
      on your Apple II. Thus, it's in your best interest to download a
 
      binscii decoder.
 
    3. Make sure you have a method of getting files to a ProDOS disk on
 
      your Apple. That may include downloading with a communications
 
      program, or copying to a disk from another computer. Please note
 
      that Apple II and IBM PC 5.25" and 3.5" disk formats are different
 
      at a hardware level, so without (rare) addon hardware on one or
 
      both sides, you cannot use an IBM PC to download stuff to an Apple
 
      II disk.
 
      Macs running system 7 can write to ProDOS 3.5" 800K disks, but
 
      please note that the Macintosh system software has the bad habit
 
      of adding a "resource fork" to files. This makes them UNREADABLE
 
      from most Apple IIs, unless you run a special program on them from
 
      the Macintosh side. Please see the section on file transfer from
 
      Macintosh to Apple II for where to get that program.
 
      If you do not have ProDOS, please contact your local Apple II User
 
      Group for a copy-- they can copy it free of charge. If you do not
 
      have a modem program, but do have a modem or null modem to another
 
      computer, Steve Cavanaugh's disk that was mentioned above has some
 
      simple comm programs. Alternatively, the commercial program
 
      ProTERM 3.1 by Intrec is by far the best general Apple II
 
      communications program, so if you have at least a 128K Enhanced
 
      Apple //e, a //c, IIc+, or Apple IIGS, it is worth it to invest in
 
      this program. See the sections on dealers below for Intrec's
 
      address and phone number.
 
      The rest of this tutorial assumes that you have read the above
 
      sections and have a basic clue as to how to navigate the internet
 
      and download files.
 
    4. Download the file 'BINSCII.TXT', written by Todd Whitesel to your
 
      Apple II. A copy is linked in at Nathan Mates's Apple II Resources
 
      WWW pages, http://www.visi.com/~nathan/a2/binscii.txt Or, check
 
      the major Apple II ftp sites (see above), as well as
 
      ftp.ugcs.caltech.edu, pub/nathan/binscii.txt
 
      This is a text file. (Previous versions of it were named
 
      'binscii.exe', which most people confused as being a MS-DOS
 
      executable, which the program most definitely is not.) It must be
 
      downloaded in text mode to your computer, or it will require some
 
      work to get it working. Check the ftp and [z]modem transfer
 
      options to make sure binary mode is off before downloading it to
 
      your Apple II.
 
      If you used a Macintosh to write the file to a ProDOS disk, be
 
      warned that it'll sometimes add a 'resource fork' to the file,
 
      rendering it unusable under ProDOS and Basic with a "FILE TYPE
 
      MISMATCH" error on trying to access it. To avoid that, see the
 
      section on file transfer from Macintosh to Apple II for a Mac
 
      program to clean up after that problem.
 
    5. See if you can unpack it. You will need to get to Applesoft Basic
 
      under ProDOS to do this. [ProDOS identifies itself as such when
 
      booting, and Basic is the ']' prompt available by running
 
      'BASIC.SYSTEM' if you booted to the Finder]. From the prompt,
 
      change to the disk/directory with the BINSCII.TXT file in it. [A
 
      reference on Dos 3.3 and ProDOS commands is not part of this FAQ,
 
      but is available at http://www.visi.com/~nathan/a2/faq/dos.html]
 
      Next, verify that the file was transferred as a text file. From
 
      the prompt, type the following:
 
  
PR#3
+
== If you have a Vulcan or AE High Density disk ==
CATALOG
 
  If the "PR#3" command causes your computer to crash, hang, or display
 
      garbage, you do not have an 80-column card in the normal place.
 
      [This is rare, and only happens on ][+s, or stock //es.] Reboot
 
      your computer and try again without the PR#3 command. The catalog
 
      should have a line like the following (though the date and time
 
      will vary)
 
  
BINSCII.TXT      TXT      12  20-AUG-96  20-AUG-96  3:14    5645
 
  [If not in 80-column mode, that'll be wrapped to 2 lines.] Anyhow, the
 
      number we wanted was the very last number, which should be 5645.
 
      If that number is 5737, you downloaded in binary mode off an IBM
 
      PC. That's fixable. If the number is 512, you disregarded the
 
      warnings above about how the Macintosh will make an Apple II file
 
      unreadable; see the section on file transfer from Macintosh to
 
      Apple II for a Mac program to clean up after that problem.
 
      Also, note the file type in the second column, which is 'TXT'
 
      here. If it is already TXT, you can skip forward to step 5. Fixing
 
      the filetype. First, note what it currently is. If it's not 'TXT',
 
      common alternatives are 'BIN' or '$00', but almost anything is
 
      possible. The second and fourth line of the following commands,
 
      assume it's '$00', with file length 5645. Modify those two values
 
      to match what you saw in the catalog listing above:
 
  
RENAME BINSCII.TXT,BINSCII.ORIG
+
Due to problems with the Vulcan, when booting, it asks for your System Disk. Just put the Vulcan driver on your boot disk, boot it, and then launch the installer. Alternately, put the driver on the installer disk and boot it. (but you have to delete some of the installer scripts first) For the AE High Density Drive, be sure to remove Apple's 3.5" driver when putting on AE's.
BLOAD BINSCII.ORIG,A$2000,T$00,L5645
 
CREATE BINSCII.TXT,TTXT
 
BSAVE BINSCII.TXT,A$2000,TTXT,L5645
 
  This first renames the old file, loads it up, creates a file of the
 
      right length and then writes the new file.
 
    6. Now that the file type is correct, trying to install binscii. Type
 
      the following:
 
  
EXEC BINSCII.TXT
 
  If you get a lot of ?SYNTAX ERRORs and beeps, then you most likely did
 
      not download it in ascii mode. You should try again, making sure
 
      of ascii mode, or try typing in this program. If the file size you
 
      got from the CATALOG above is not 5645, change the 5645 in line 10
 
      to whatever it is.
 
  
10 D$=CHR$(4): L=5645
+
== If you have ProSel as your program launcher ==
20 PRINT D$"BLOAD BINSCII.TXT,A$2000,TTXT,L"L
 
30 FOR I=8192 TO 8192+L: IF PEEK(I)=10 THEN POKE I,13
 
40 NEXT: ONERR GOTO 60
 
50 PRINT D$"DELETE BINSCII2.TXT"
 
60 PRINT D$"CREATE BINSCII2.TXT,TTXT"
 
70 PRINT D$"BSAVE BINSCII2.TXT,A$2000,TTXT,L"L
 
  Use the basic command 'RUN' (no 's) to run this program. After it is
 
      done, you should have a better chance at being able to "EXEC
 
      BINSCII2.TXT" and run it.
 
    7. After all of this is done, you should have the 'BINSCII.SYSTEM'
 
      program on the disk/directory you EXECd binscii from. To run it,
 
      type
 
  
-BINSCII
 
  That should start it. For now, with no files to decompress, just exit
 
      it. Congratulations, you can now unpack BINSCII files.
 
    8. There are fancier BINSCII decoders, but this one is the only that
 
      can be easily transferred. If you have a GS, you might want to
 
      consider downloading the gsciiplus program from some of the
 
      following ftp sites:
 
      apple2.archive.umich.edu, apple2/gs/archivers/gscii.bsc
 
      apple2.caltech.edu pub/apple2/addons/nda/gscii231.shk
 
      However, to unpack this, you will need a Shrinkit program
 
      (detailed in the next section) to unpack them before you can use
 
      them. Once unpacked, you will need to copy the 'gsciiplus' NDA to
 
      the DESK.ACCS folder inside the SYSTEM folder on your boot GS/OS
 
      disk.
 
     
 
  5.12 How do I download and unpack a Shrinkit unpacker?
 
 
 
  Ok, getting and downloading binscii is the hard part, promise. Because
 
  binscii takes care of the worry of filetypes, end of lines and the
 
  like, you don't really need to worry about those problems again.
 
 
 
  Which Shrinkit program you should download depends on which model of
 
  Apple II you have. These programs are listed in increasing order of
 
  features and better user interfaces, so Unshrink ][+ will run on
 
  pretty much anything that you got binscii running on, while
 
  GS-Shrinkit 1.1 will only run Apple IIGSs. Apple IIGS programs can
 
  have file formats known as 'forked files' which ProDOS 8 and regular
 
  Shrinkit cannot unpack, so if you wish to download and unpack most GS
 
  programs, GS-Shrinkit is required. (The exceptions are demos and the
 
  like distributed as a shrunk copy of a disk)
 
 
 
  At least an Apple ][+ with 64K running ProDOS:
 
         
 
          Your only option is Unshrink ][+ and Autounshrink, available
 
          via ftp from
 
         
 
          apple2.caltech.edu, pub/apple2/ARCHIVERS/unshk2plus.bsc
 
          apple2.caltech.edu, pub/apple2/ARCHIVERS/autounshk.bsq
 
         
 
  At least an Enhanced Apple //e with 128K, or //c, IIc+, IIGS:
 
         
 
          Although you can run Unshrink ][+, Shrinkit 3.4 is far better.
 
          Get
 
          apple2.caltech.edu, pub/apple2/ARCHIVERS/shrinkit34.bsc
 
         
 
  At least an Apple IIGS with at least 1.5MB Ram, running GS/OS System
 
          5.0.4 or later, hard drive recommended:
 
         
 
          GS-Shrinkit is the best choice, though if you spend most of
 
          your time in ProDOS 8, you may also want to get Shrinkit 3.4 as
 
          well as detailed above. You can get GS-Shrinkit from
 
          apple2.caltech.edu, pub/apple2/ARCHIVERS/gshk11.bsc
 
         
 
  Download the appropriate file(s) to your computer, and unpack them
 
  with the binscii decoder.
 
 
 
  IMPORTANT NOTICE: The gscii plus NDA (and related unpackers, like the
 
  sscii command) can NOT correctly unpack the GS-Shrinkit 1.1 file. You
 
  _MUST_ use the binscii program that was mentioned and downloaded in
 
  stage 1, or wait for GS-Shrinkit 1.1A.
 
 
 
  Run them Shrinkit program you just unpacked. GS-Shrinkit can be run by
 
  double-clicking on its icon in the Finder or the equivalent for other
 
  launchers. For the other programs, from the Basic ']' command in the
 
  disk/directory where you unpacked the program type 'CAT' to get a list
 
  of files. Find the filename of the program, and then '-FILENAME' to
 
  run it. (Replace 'FILENAME' with the name you saw in the list)
 
 
 
  5.13 How do I unpack a generic .SHK or .BSQ file?
 
 
 
  Now that you have all the files you want on your Apple II, you will
 
  first need to run the binscii program on any BINSCII'd files you
 
  downloaded, and then the Shrinkit program on the results of the
 
  un-binsciiing and/or any .SHK/.BXY files you downloaded. Once you're
 
  done with that, it's up to you to play around with the files you
 
  unpacked.
 
 
 
  After unpacking the .BSQ files, you'll notice that .SHK files are
 
  usually produced. You do not need to keep the .BSQ files around to
 
  unpack the .SHK files; you may delete the .BSQ file(s) at your
 
  convenience. Similarly, once the .SHK file is unpacked, you can delete
 
  it if you do not expect to need to unpack it again anytime soon.
 
 
 
  5.14 I can download .BSQ files fine, but .SHK files can't unpack. What's
 
  wrong?
 
 
 
  If these files are coming from a standard Apple II ftp site, such as
 
  those listed in section 5.2, they should unpack fine as long as you
 
  download the files in BINARY mode at every stage, which includes from
 
  the ftp site to any intermediate machines along the way. Any single
 
  text download will usually corrupt a .SHK file enough to make it
 
  impossible to unpack. Make sure that you're downloading in binary at
 
  each and every stage. Binscii (.BSQ) files contain enough extra
 
  information so that they aren't affected by ascii downloads.
 
 
 
  There are the occasional bad uploads to the ftp sites, but these tend
 
  to be reported quickly and dealt with. If you're having a problem with
 
  a file, and are very sure that the file is bad on the ftp server,
 
  please email the administrator to resolve the problem. Administrators
 
  should have tools to verify the integrity of any files on their sites,
 
  and deal with any problems on their end. [Administrator's email
 
  addresses are usually listed when you connect to a ftp site.]
 
 
 
  5.15 Apple Archive Format (aaf)
 
 
 
  Apple Archive Format was invented as a standard way to post source
 
  code to comp.sources.apple2. The C and Basic source code to aaf
 
  unpackers are available on the various FTP sites, in aaf format.
 
  Fortunately, files in aaf format can be turned back into source code
 
  with a simple text editor. Just break the file up into component files
 
  and remove the first character of each line.
 
 
 
  ftp://apple2.archive.umich.edu /apple2/unix
 
 
 
  Alternative location, including dox: http://www.openix.com/~jac
 
  
    _________________________________________________________________
+
Rename start to something else before running the installer, or else the Finder won't be installed. Also, ProSEL as a launcher will cause a bogus $0040 error on some programs such as the first DOTW release.
  
Filetypes and dealing with files of various types
 
  
  6.1 A quick note about ProDOS filetypes
+
== If you have an AMR 3.5" drive ==
  
  ProDOS keeps some information about a file's type. Files can be text
 
  (TXT), binary (BIN), executable (SYS), fonts (FON), etc. Most other
 
  file systems do not have a place to store this information, so it may
 
  get 'lost' when you upload the file. Similarly, when you download a
 
  file, you may not know the file type. Most comm programs will use some
 
  default. For NuFX archives, this is not a big deal, since you can
 
  still unpack an archive if the filetype is wrong (and the archive
 
  protects the filetype of the files inside the archive). For other
 
  files, you may need to change the file's type. One utility that comes
 
  well recommended is File Attribute Zapper II.
 
  
  ftp://apple2.archive.umich.edu /apple2/8bit/util/fazz.2.3.bsq
+
If the computer hangs (mostly at the Standard File Save/Open dialog box) with no disk in the drive, try putting one in. What's happening is that GS is reading the status from the drive, and the drive won't return anything unless there is a disk in the drive. Just stick a disk in and all will be fine. If it really annoys you, either deactivate the 3.5" driver (get IR so you can double-click to re-activate it) or simply keep a disk in the drive at all times. This is not a problem under ProDOS 8.
  
  6.2 Net standard formats
 
  
  There are several formats that are used widely on the Internet. The
+
== GSCII+ & HFS Note ==
  most common in FTP sites are tar (.tar) and compress (.Z). From a unix
 
  box, to undo a Tape Archive, type 'tar -xvf filename.tar', to undo a
 
  compress, type 'uncompress filename.Z'. Since tar does not make the
 
  file smaller, and compress can only compress 1 file, many times you
 
  will find files that are 'tarred an feathered'. They have a '.tar.Z'
 
  extension. Just run uncompress then un-tar the result. Other USENET
 
  groups will use uuencode (.uu) to send binaries. From a unix box, just
 
  type 'uudecode file.uu'. BinSCII is better than uuencode because 1) It
 
  stores the ProDOS filetype. 2) It splits the file into manageable 12K
 
  chunks. 3) It does a CRC checksum on each chunk.
 
  
  Most of these 'Unix' standard formats are available on the Apple. See
 
  the table below.
 
  
                              Format Types
+
There is a problem with the HFS FST, but only GSCII seems to be affected. When de-binscii-ing files, put the output onto a ProDOS volume, not an HFS one.
          +-------------------------------------------------------+
 
          |NuFX|Bin |uuen-|com- |.ZOO|Bin |LZH/| Stuff| ARC| Other|
 
Program | |    |SCII|code |press|    |Hex |LHA | -It  |    |      |
 
--------|-|----|----|-----|-----|----|----|----|------|----|------|
 
Angel[1]|e|    |    |    |  X  |  X |    | X  |      |  X | .ZIP |
 
BSC    |c|    |  E |    |    |    |    |    |      |    |      |
 
Balloon |g|  X |    |    |    |    |    |    |      |    |      |
 
Binscii |e|    |  X |    |    |    |    |    |      |    |      |
 
DeArc  |e|    |    |    |    |    |    |    |      |  D |      |
 
GSCII+  |g|    |  X |  X  |    |    | D  |    |      |    | .AAF |
 
GShk    |g|  X |    |    |  D  |  D |    |    |  D  |  D |      |
 
LHext  |x|    |    |    |    |    |    | D? |      |    |      |
 
Nulib  |c|  X |    |    |    |    |    |    |      |    |      |
 
PMPUnzip|x|    |    |    |    |    |    |    |      |    | .ZIP |
 
SciiBin |c|    |  D |    |    |    |    |    |      |    |      |
 
Shrinkit|e|  X |    |    |    |    |    |    |      |    |      |
 
Spectrum|g|    |  X |    |    |    | X  |    |      |    |      |
 
sscii  |x|    |  X |  X  |    |    | X  |    |      |    |      |
 
(Key:  E = Encode only,   D = Decode only,  X = Encode and Decode)
 
(Type:  e = Apple //e,  g = GS Only,  x = GS EXE file, c = C Source code)
 
[1] Angel is pretty Buggy, but it's worth a try.
 
  
    Where to get those programs listed above
+
[ Mega-thanks to Dave Lyons & friends for these. ]
  
  This FAQ already lists exactly where to get Binscii and GSCII+ as well
 
  as the Shrinkit programs, as well as the top level directories of
 
  several major ftp sites. To save some hunting around in the directory
 
  structures, Apple II versions of most archive programs are located at
 
  the following places:
 
  
  Caltech's Apple II Archive: apple2.caltech.edu, pub/apple2/ARCHIVERS
+
== Finder 6.0.1 is displaying garbage in the windows! ==
  Ground: ftp://ground.isca.uiowa.edu/apple2/Mirrors/caltech/ARCHIVERS
 
    _________________________________________________________________
 
  
6.3 What do the file extensions mean?
 
  
  Many times, people put filename extensions (extra characters at the
+
System 6.0.1's Finder occasionally gets some of its files corrupted, and then fills a window (or the screen) with multicolor garbage when a window is opened. This is extremely annoying, but there are ways to fix it. First, try installing Grand Unified Patcher Program (see the section above (9.1) on system 6.x patches).
  end of a filename) to denote what type of file it is. Please note that
 
  these are just accepted standards. If a file does not indicate it's
 
  type, you will probably have to guess. The following is a table of
 
  some common filename extensions. (Note that upper/lower case usually
 
  doesn't matter in extensions) See the previous section (on archivers)
 
  for programs that will deal with these files.
 
  
Extension  What is it?  (What program do I use?)
+
If that doesn't work, go to the 'Preferences...' menu item under the Finder's 'Special' menu, and turn off the hiding of invisible files. Inside the 'Icons' folder on each disk/partition, there's a file called 'Desktop'. Trash it, and reboot. [This file contains window sizes and custom icon placements, as well as duplicate copies of icons from System 6-savvy applications with 'rBundles' attached. No real harm other than losing the window placements is done by trashing it.]
---------  ---------------------------------------------------------------
 
Text only files:
 
.html  [TEXT] ASCII text file with (ascii) formatting codes. Used to
 
        format documents on the World Wide Web, some other places.
 
.htm  [TEXT] .html, but the extension got trimmed to 3 characters
 
.txt  [TEXT] An ASCII text file: usually English text.
 
  
Archive files:
+
Lastly, you can look for bad icon files-- make a new folder (such as 'Icons2') on each hard drive, and move all files except 'Ftype.Apple' out of the Icons folder on each disk/partition to the new folder. Reboot and see if the problem still occurs. If not, move a few files back at a time, reboot, and see if you have the problem. When you've isolated the problem file, don't use it anymore.
.aaf  [TEXT] Apple Archive Format for source code (aaf.unpacker)
 
.ACU  Applelink Conversion Utility (Shrinkit)
 
.ARC  ARC Archive (IBM ARC, GS Shrinkit, //e Angel or DeArc2E)
 
.CPT  Compactor Pro archive (Compactor Pro on a Mac only)
 
.BSC  [TEXT] Binscii file. (Binscii)
 
.BSQ  [TEXT] Binscii'd NuFX file. (Binscii--then Shrinkit)
 
.BXY  NuFX archive with a Binary II header. (Shrinkit)
 
.BNY  BLU archive. (Shrinkit)
 
.BQY  NuFX or Binary II  with BLU header. (Shrinkit)
 
.BNX  NuFX with BLU header. (Shrinkit)
 
.dsk  Disk image of 140K 5.25" Apple disk. No legitimate and copyrght-
 
        enforcing Apple II sites use this format, so it is not covered in
 
        this FAQ.
 
.exe  [TEXT] Executioner file. May only work in DOS 3.3. See above.
 
          Note: .EXE generally means IBM executable (binary) program.
 
.gz    Gzipped file. No legal Apple II software distributed in this format.
 
.HQX  [TEXT] Mac BinHex file. (BinHex on Mac or GSCII+ on GS)
 
.LZH  LZH Archive (IBM/Amiga LZH program, //e Angel)
 
.LHA  LHA Archive (IBM/Amiga LZH program, //e Angel)
 
.QQ    BLU archive. (Shrinkit)
 
.SEA  Self-extracting archive (Usually Mac, might be Shrinkit archive)
 
.SIT  Mac StuffIt archive. (StuffIt on Mac (preferred) or GS ShrinkIt;
 
        GS Shrinkit will only decode very old StuffIt files.
 
.SHK  NuFX archive. (Shrinkit)
 
.SDK  NuFX with a shrunk disk image. (Shrinkit)
 
.tar  Unix Tape Archive (Unix 'tar -xvf', GS EXE tar)
 
.tgz  Gzipped .tar file
 
.uu    [TEXT] Unix uuencode file [TEXT] (//e uudecode, Unix uudecode)
 
.uue  [TEXT] Unix uuencode file [TEXT] (//e uudecode, Unix uudecode)
 
.ZOO  IBM Zoo Archive (GS Shrinkit or IBM ZOO program, //e Angel)
 
.ZIP  IBM Zip Archive (GS EXE Unzip, IBM PKUNZIP, Unix unzip, //e Angel)
 
        PMPUnzip
 
.Z    Compressed file (GS Shrinkit, Unix uncompress, //e Angel)
 
  
Common graphics file extensions:
 
.AVI  Windows Movie. No Apple II program can display this.
 
.BMP  Windows and OS/2 Bitmap format.
 
.GIF  Graphics Interchange Format: Compressed picture.
 
        (IIGIF for //e, many programs for all other computers)
 
.JPG  Newer graphics format. (GS viewers only)
 
.JPEG  Newer graphics format. (GS viewers only)
 
.MOV  Quicktime Movie. No Apple II program can display this.
 
.MPG  Movie format. No Apple II program can display this.
 
.MPEG  Movie format. No Apple II program can display this.
 
.TIFF  Graphics format (GS SHR Convert and others)
 
  
Common sound file extensions:
+
== Icons no longer point to apps. How do I rebuild the desktop database? ==
.AU    Sun (unix) audio format. rSounder 3 can read, AudioZap 2.0 can
 
        read/write.
 
.MOD  Amiga Music file. Some GS programs can read & play these.
 
.WAV  Windows file. rSounder 3 can read 8-bit WAVs, AudioZap 2.0 for GS
 
        can read/write, other programs can guess at reading
 
  
  All 'text only files' files can usually be opened directly in any word
+
Easiest way: from Finder, go to prefs, turn off hide invisible files. In each disk partition's 'Icons' folder, there should be a file named 'desktop'. Delete it. That'll just force a new desktop database file to be created next time you start the Finder; you'll still have to click on each file that put its rBundles into there to rebuild it.
  processor, assuming they were downloaded in ascii mode. (Downloading a
 
  text file in binary mode from a non-Apple (Apple II or Macintosh)
 
  machine will probably be formatted incorrectly.)
 
  
  All of these types, except the ones marked [TEXT] are BINARY files.
+
Better way: Softdisk G-S #47 or 48, program I (Nathan Mates) wrote called 'Rebuilder'. Deletes the desktop file, then scans the drive for all rBundles and adds them.
  Binary files cannot be sent over e-mail, posted to the newsgroups or
 
  FTP'd in text mode. You must FTP them in binary mode (see the section
 
  on FTP). You can download either with kermit, X-,Y- or Z-Modem.
 
  
  See the next few sections for how to use transfer text, pictures,
 
  general graphics, and sound/music files.
 
  
  Generally, anything labeled as 'Archive' above can and do contain
+
== How do I make a 3.5" disk that boots and runs an Application? ==
  multiple files, and even subdirectories. Most archivers (except for
 
  tar) also compress the files so that they take less disk space and
 
  time needed to download them.
 
  
  Sometimes you will find multiple filename extensions. Simply take the
 
  filename extensions apart one at a time starting with the rightmost
 
  and you should be able to reconstruct the original file. (i.e.
 
  somefile.bsq.tar.Z would mean: uncompress, untar, unbinscii, then
 
  unShrink to get the original file!)
 
  
  6.4 How do I USE stuff I have transferred to/from an IBM/Mac?
+
Assuming that this (or any other program) is a ProDOS 16 or GS/OS app, the way to put it on a self-booting disk is:
  
  A:If you get a 'File Type Mismatch' error on when trying to read a
+
1) Format disk, install GS/OS on it, with any desired extensions, etc
  file you transferred via a mac, then you will need to remove the
 
  resource fork from the file. See the section on file transfer from
 
  Macintosh to Apple II for where to get that program.
 
  
  In general, only certain types of files can be usefully transferred
+
2a) Copy the app you want to run to the system folder of that disk, and rename it 'Start'
  back-and-forth between computers. One thing that you CANNOT do is run
 
  programs designed for another type of computer. But often you can
 
  transfer data files between similar programs (Spreadsheets) on
 
  different platforms. Here are some pointers:
 
  
  6.5 How do I use text files from other computers?
+
-OR-
  
  One helpful hint is that all computers can read text files. Most word
+
2b) Copy the app you want to run to the root directory (lowest level) of the disk, and make sure its filename ends in ".SYS16", renaming it if necessary. If you do this, delete any 'Start' program in the system folder.
  processors can save your file as text and import as text. But with
 
  text files, you will loose all your formatting (font type, centering
 
  and so-forth). For spreadsheets, saving as DIF will make conversion a
 
  breeze. Databases can be saved as tab-delimited records. (Note that in
 
  AppleWorks, you have to go to Print to save in these formats). Look
 
  for options like "Import" or "Export" (or "Save As" in the Mac world).
 
  
  If you want to do better, there are several options available. A
+
This assumes that the program is small enough to fit on that disk; if space it tight, you may want to consult either http://www.visi.com/~nathan/a2/faq/mini.601.html and/or http://www.visi.com/~nathan/a2/faq/sys6files.html for lists of what files you might be able to remove.
  commercial program called MacLinkPlus can do some conversions. Some
 
  Claris programs do conversions automatically. Also, AFE can convert
 
  between some kinds of documents (For example AppleWorks Word Processor
 
  to MsWorks) if you have the right translator.
 
  
  ftp://sumex-aim.stanford.edu/info-mac/util/afe-appleworks-msworks.hqx
 
  
  For IBM folks, The CrossWorks program can convert between many Apple
+
== What's the difference between 2:1 and 4:1 3.5" formatting? ==
  and IBM formats, and even comes with a universal null modem cable.
 
  Alternately, If you use AppleWorks a lot, you can get SuperWorks for
 
  the IBM, a clone of AppleWorks. It can import AppleWorks files
 
  directly. For graphics, SuperConvert can convert between all
 
  Apple-specific graphics formats and many Mac, Amiga and IBM specific
 
  formats. It can also save as GIF, which is a universal standard.
 
  
  6.6 How do I view picture files from other platforms?
 
  
  A: There are quite a few programs available, each capable of reading
+
These two ratios are possible interleave factors for 3.5" disks. Unidisks 3.5"s maximum speed is at the 4:1 interleave factor; if 2:1 disks are inserted in them, a lot of time will be wasted while the disk blows revolutions reading sequential sectors. Apple 3.5" drives best speed is at 2:1; 4:1 disks in them can be accessed slightly slower than 2:1, but not anywhere near as bad as 2:1 disks in Unidisk drives. Thus, if you don't have Unidisk drives, 2:1 should be selected, but if you're using a mix of drives or Unidisks, 4:1 is the optimal speed.
  different file formats:
 
  
  GIF, BMP, other lossless compressed formats:
 
    * IIGIF is a freeware GIF converter for any Apple II (but there is a
 
      patch needed for the Apple //c). It reads in GIF and saves as
 
      hires or double-hires.
 
      ftp://apple2.archive.umich.edu/apple2/8bit/graphics/iigif.bsc
 
      ftp://apple2.archive.umich.edu/apple2/8bit/graphics/iic.patch.for.
 
      iigif
 
    * MACDOWN is also freeware and lets you do the same with MacPaint
 
      pics.
 
    * A ProDOS 8 version of The Graphics Exchange from Roger Wagner
 
      Publishing.
 
  
  [The following software only work on an Apple IIGS]
+
== What do I do with icon files for the Finder, and how can I customize how they appear? ==
  
    * Convert 3200 is one of the best programs still being sold for
 
      graphics conversion on the GS. A short list of file formats it
 
      handles is: Apple Preferred Format (GS) and PaintWorks Gold
 
      format, various 3200 color GS formats, as well as Windows-OS/2
 
      BMP, Compuserve GIF, Amiga .IFF/ PC .LBM, Paintbrush PCX, Binary
 
      PC and several varieties of TIFF files. It can save in a number of
 
      those: Apple Preferred, Windows BMP, Paintbrush PCX, TIFF, Binary
 
      PC and Print Shop GS.
 
      For more information, please see
 
      http://www.crl.com/~joko/convert.html.
 
    * The Graphics Exchange converts between many formats of graphics;
 
      the 16-bit version is also available from Roger Wagner Publishing.
 
    * Prizm v1.0 Converts .GIFs, Amiga IFFs, Raw Files, and some other
 
      types to Grayscale (very fast), 16 colors, 256 colors, and 3200
 
      colors! Size of picture limited by availabe RAM (Not sure where
 
      it's available from anymore either; it was commercial.)
 
    * SuperConvert (commercial program, published by Seven Hills
 
      Software) loads all GS formats, plus GIFS and other non-GS
 
      specific formats and saves in all GS formats (including Finder
 
      Icon files). It has more dithering options than most of the other
 
      programs, but you may have to play with it to find the best one.
 
      It can also save in TIFF and GIF formats if you want to move Apple
 
      II graphics to other machines. Version 4.0 of this program is
 
      faster and adds support for JPEG files.
 
    * SHRConvert is the earlier, shareware, predecessor to SuperConvert.
 
      It does a pretty good job on the types of graphics it supports.
 
      SHRConvert used to be available for download at
 
      ftp://apple2.archive.umich.edu/apple2/gs/graphics/shrconvert.2.1.b
 
      sq, but it appears to be pulled off ftp sites at the author's
 
      request when SuperConvert was published.
 
    * Platinum Paint is a commercial program that can import all GS
 
      formats plus MacPaint. It can only save in SHR and Apple
 
      Preferred. Version 2.0 can make Animations too! Platinum Paint was
 
      sold by Scantron Quality Computers.
 
    * The Byte Works has a TIFF Viewer/Converter that'll read in TIFF
 
      files on the GS.
 
    * Animasia is reported to have some sort of .DXF (3D format used by
 
      CAD programs among others) importer; it runs only on the GS.
 
    * ShowPic 6 is a shareware NDA that can display most GS formats. You
 
      can also save the resulting graphic as a IIGS SHR painting.
 
      ftp://apple2.archive.umich.edu/apple2/gs/gsos/nda/showpic.6.0.bsq
 
    * DreamGrafix supports all 3200 color picture types and also 16
 
      color and 256 color pictures. This is a very impressive commercial
 
      paint program with its 3200 color support. EGO Systems (now since
 
      out of business) has teken over distribution of this; see the
 
      dealers section of this FAQ for their address.
 
  
  Note: 'All GS formats' includes Superhires (type $C1 and $C0), hires,
+
Under System 6.0, each volume you have online can (and the Finder will occasionally auto-add this) have a folder named 'Icons' in the root directory. Applications with separate icons files (as identified by a Finder 'Get Info') can have that icons file copied to the Icons folder of that partition. For example, the application /Games1/OneArmBattle/OneArmBattle should have its icon file copied to /Games1/Icons/ . Most icons files are simply cute fluff, and are not needed to run things correctly. A lot of files may also slow down loading of the Finder, as it must reload all icons files each time.
  double-hires and PrintShop/PrintShop GS.
 
  
  JPEG and other lossy formats:
+
The 'FType.Apple' file installed to the Icons folder of the boot disk along with the rest of the System Software is a required file for the Finder, GS Shrinkit, and possibly other applications. Do not mess with it; it does not contain any icons, but the text descriptions of file types you can see from the Finder.
  
  As far as I know, JPEG viewers are only available for the Apple IIGS,
+
If you want to make your own icons, or point them at various applications, the best way to do this is to make up a custom icon for the filetype, and set the icon application path to the application you want to run. IconED 2.0 is a good icon editor, and is available from ftp://apple2.caltech.edu/pub/apple2/utils/. Once your icon file is created, it should be saved in an Icons folder on one of your disks, preferably the boot volume. As the first match of an icon is used, you may want to do a directory sort to move your custom file to the top of the Icons folder or elsewhere if things are matching oddly.
  no other Apple II machines. Seven Hills Software's commercial program
 
  SuperConvert (version 4.0 or later) can view and convert them. A
 
  number of free viewers are available at
 
  ftp://apple2.caltech.edu/pub/apple2/graphics/viewers. Check them out
 
  if you're interested.
 
  
  6.7 How do I use Icons/Fonts/etc from other platforms?
 
  
  A: For reading Mac icons and such, try "Resource Spy"
 
  
  ftp://apple2.archive.umich.edu/pub/apple2/gs/util/resource.spy.bsq
+
= Resources for the Apple II =
  
  Note that Mac TrueType fonts will require you to purchase the
 
  'Pointless' program by Westcode software before you can actually use
 
  them on a GS. Once you have that installed, you can copy Mac TrueType
 
  fonts off a Macintosh disk and use them without any conversion through
 
  Resource Spy. IBM Truetype fonts are in a different and unspported
 
  file format. Conversion programs exist for the Macintosh (and possibly
 
  IBMs as well), but no GS converters exist.
 
  
  No Truetype readers exist for non-GS Apple IIs to my knowledge;
 
  Postscript fonts are not displayable by any Apple II programs to my
 
  knowledge. EGO Systems' LaserBeam 1.1 can download PostScript fonts to
 
  an attached Laserwriter.
 
  
  6.8 How do I listen to sounds/music from other platforms?
+
== Apple II Groups ==
  
  Ian Schmidt has put together an Apple II Sound & Music FAQ which has
+
http://www.a2central.com
  much more detail on this subject. It is available online at
+
http://www.apple2.org
  http://www.visi.com/~nathan/a2/faq/snd.mus.html.
 
  
  For non-GS Apple IIs, there are two programs available. Michael
 
  Mahon's Sound Editor 2.2 is supposed to have very good playback. It is
 
  available from http://members.aol.com/MJMahon/sound22.shk
 
  
  'IISound' is also available for regular Apple IIs; it can play back
+
== Hardware and Software Vendors ==
  many sorts of sounds, and is reported to use the same playback
 
  routines as Mahon's program above. You can get it from:
 
  ftp://apple2.caltech.edu/Zocalo/pub/apple2/8bit/music.and.sound/iisoun
 
  dv4.2.shk.
 
  
  With the expanded sound circuitry of the GS, the number of sound
+
http://gse-reactive.com - Apple II Hardware
  programs is dramatically increased. On the GS, the program
 
  'MacSoundGrabber' can read Mac sounds out of Mac files, and save them
 
  in a GS format; you can get it from
 
  ftp://apple2.caltech.edu/pub/apple2/sound/macsoundgrab.shk.
 
  Alternatively, you can use the 'rMover' addon for Hypercard.
 
  
  Also, programs such as rSounder 3 and AudioZAP for the GS can
+
http://apple2.info - Focus Hard Drive Controller - Apple IIgs 8 MB Cards  - Apple II Slot expansion chassis
  read/play WAV files and lots of other formats. rSounder can also save
 
  converted files (8-bit input only) as GS Resource-based sounds,
 
  suitable for the System 6 Sound control panel.
 
  
  With most 8-bit mono sounds, you can simply import the file as binary
+
The Byte Works products are available at http://www.syndicomm.com. Apple IIGS assemblers, compilers, and utility programs such as a spreadsheet and a morphing program. They are also one of the few sources for Apple II books full of technical and programming information.
  and use the editor to strip off any header and Zero (0) bytes, which
 
  cause the sound to stop prematurely on playback due to the way the
 
  GS's Ensoniq chip handles samples. 16-bit formats (a number of WAVs,
 
  possibly also .AUs) will sound like garbage; only rSounder 3 and
 
  AudioZAP 2.0 (available only after paying the $20 shareware fee for
 
  AudioZAP 1.x) can deal nicely with those.
 
  ftp://apple2.caltech.edu/pub/apple2/sound/rsounder3.shk.
 
  ftp://apple2.caltech.edu/pub/apple2/sound/audiozap.shk.
 
  
  About the only non-Apple II music format which is readily playable is
+
10.3 Fun hardware add-ons
  the Amiga .MOD format. Many players exist, from fairly lousy to ones
 
  doing a pretty good job. Recommended ones are MODZap, Beatbox,
 
  Shellplay/Deskplay; most of those are available from
 
  ftp://apple2.caltech.edu/pub/apple2/music/modplayers.
 
  
  6.9 How do I transfer Hypercard/Hyperstudio files?
+
///SSH Systeme, http://users.ids.net/~kerwood/shh.html (Write to: SHH SYSTEME, Dipl. Ing. Joachim Lange, Bergstrasse 95, 82131 Stockdorf, Germany) is selling several cards for the Apple II, allowing you to connect IDE drive(s), PC Floppy drives, or expand a Transwarp GS's cache. Contact jlange@tasha.muc.de.
  
  Apple bundled a 'rMover' program with Hypercard GS that facilitated
 
  the transfer of files that didn't require custom XCMDs. It can
 
  transfer in both directions. I've never used it, but the necessary
 
  files should be available with the rest of Hypercard at
 
  ftp.support.apple.com, pub/apple_sw_updates/US/Apple_II/HyperCard_IIGS
 
  . These files are unfortunately only unpackable on Macs. The .bxy
 
  files (despite the filetype extension) are not readable on Apple IIs
 
  unless you manually strip off the 512 byte header
 
  
  Apparently the Mac version of HyperStudio will run GS HyperStudio
 
  stacks without conversion.
 
  
    _________________________________________________________________
+
== Periodicals & Books ==
  
  
 +
Juiced.GS = http://www.juiced.gs - Published by Ken Gagne
  
There are a lot more questions with answers not included directly in
+
== Misc Resources ==
this FAQ; please see http://apple2.info/wiki/index.php?title=CSA2_FAQ
 
for more of them.
 
  
Copyright 2007 by Tony Diaz
 
  
 
--- End Part 4 of 4
 
--- End Part 4 of 4

Revision as of 07:24, 18 September 2007

From: tdiaz-apple2-org (Tony Diaz) Newsgroups: comp.sys.apple2,comp.answers,news.answers Approved: news-answers-request@MIT.EDU Followup-To: comp.sys.apple2 Subject: comp.sys.apple2 Frequently Asked Questions (FAQ) Part 4/4

Archive-name: apple2/faq/part4 Posting-Frequency: monthly Last-modified: August 21 2007 Version: 5.1.38 URL: http://apple2.info/wiki/index.php?title=CSA2_FAQ

The next section is the Frequently Asked Questions (FAQ) posting of the comp.sys.apple2 newsgroup. Copyright (c) 2007 by Tony Diaz (email: tdiaz-at-apple2-dot-org), all rights reserved. This document can be freely copied so long as 1) it is not sold, 2) any sections reposted elsewhere from it are credited back to this FAQ with the FAQ's copyright info and official WWW location ( http://apple2.info/wiki/index.php?title=CSA2_FAQ) left in place.

This may not be the latest version of this FAQ-- this is an archived copy. For that, drop by http://apple2.info/wiki/index.php?title=CSA2_FAQ

This FAQ may not be sold, bundled on disks or CD-ROMs, reprinted in magazines, books, periodicals, or the like without prior consent from the maintainer, Tony Diaz. Exceptions are explicitly granted for Juiced.GS and _The_Lamp. Email me for permission otherwise.

Big thanks to Nathan Mates, the previous maintainer of this comp.sys.apple2 FAQ, for allowing it to live on after his departure and anyone who took up that mantle before him.

--- Begin part 4 of 4

Contents

Some Common Questions

Can my Apple II connect to the Internet?

A: Short answer: yes, any 80 (maybe even 40) column Apple II with a serial card (and almost always a modem) can connect to an Internet Service Provider that provides a shell account. (Please note that "connect to the internet" is the better term for it; avoid the media's popularizing of metaphors related to driving or surfing.)

Longer answer: As of 3/8/97, the only available method is to have a serial (modem or null modem) connection to another computer which can translate and run stuff on it. Most of the time, this means that you will need to find an Internet Service Provider (ISP) which supports a plain "shell" connection. (Telling them you have an Apple II will likely confuse them; just tell them that a VT-100 shell is what you want). For a list of ISPs, try checking local newspaper advertisements, or drop by http://www.thelist.com.

This will give you a straight text connection to the internet; no fancy graphics. Yes, it's a lot less eye candy, but the advantage is that files transfer faster. You can still download files, pictures, and the like, and deal with them later. Once you are signed up for a shell account, you will need to connect up, usually via modem and terminal program. 99% of shell accounts are in unix systems; you should talk to the tech support desk of wherever you get your connection from for information on how to do items such as email, usenet, and the like.

If you have a GS have Seven Hills Software's Spectrum (modem communication program), they have just announced a set of addons that allow WWW browsing from an Apple II. According to their WWW press releases at http://www.sevenhills.com/applesoftware/iigs/sis/, you will need a GS with 4MB RAM (HD and accelerator recommended), Spectrum 2.1, a modem, and a GEnie or dialup Unix shell account. It does not appear to support any form of TCP/IP connection such as SLIP or PPP.

If you do not have a GS capable of running Spectrum's browser, the program 'lynx' runs on unix/vms/etc machines and lets people access the World Wide Web and display it on VT-100 terminals. It's not on every system by default; if not, ask your sysadmins to install it. The default ProTerm setup for VT100 is not too friendly to Lynx-- you will need to turn off inverse text for 'bold' and 'underlined' text if on. (Consult your manual for information on how to do so). Alternatively, when starting Lynx, you may want to start it with the "-show_cursor" option. As noted above; you can download graphics to your Apple II and view a number of formats-- see the section on dealing with graphics for more information.

As of 28 Aug 1997, Richard Bennett's freeware implementation of a TCP/IP stack for the GS is in BETA initial release, and available from its home page at http://www.zip.com.au/~kashum/marinetti/. It appears to support SLIP (PPP promised for availability shortly) right now, and is not guaranteed to be fully functional or stable.

One package is in a state of perpetual near completion: GS/TCP for the GNO/ME unix-like environment for the IIGS. As of January 13th 1998, it is NOT released yet. GNO/ME requires 1.5-2MB of RAM and a HD on your GS to use, so you may not be able to run it with your current setup. For more information from the author, Derek Taubert, see http://www.geeks.org/~taubert/gstcp/index.html. Documentation on GNO/ME in general can be found at http://www.gno.org/gno/ .

I don't have an OS/Boot disk for my Apple II or want an update. Where do I get it from?

First, consult the following chart to help determine what you should be looking to run on your Apple II-- there's a lot of possible OSs. Downloads usually require you to have comm programs up and running on your Apple II and/or Mac with a 3.5" disk that fully supports 800K disks (a lot of Powermacs are flakey in that area). Without such an ability, see below for places to purchase/copy it from. See FAQ Section 2.* on the Apple II models or FAQ section 7.7 on determing RAM to determine what your Apple II has if the limitations in the following are confusing.


  • Any Apple II, 5.25" drive, 32K or more RAM: DOS 3.3. This is not legally available online to the best of my knowledge, as Apple still holds the copyright and distribution restrictions on it. However, Diversi-DOS, a Shareware enhanced version (may require 48K or 64K RAM) of it with many speedups is available online: ftp://ground.isca.uiowa.edu/apple2/apple8/OS/divdos41c.bxy
  • Apple IIGS, 3.5" disk or HD, 512K or more RAM: ProDOS 16. Very old and slow. Not available anywhere online legally to my knowledge.

All of the above were always distributed as full versions of the system software; there is no need to 'upgrade' thru system 4 or 5 to get to 6. Consequently, don't look for any patches to save download time; those never existed.

[Note: there are some other versions of the System Disks not listed above; the ones listed are the latest versions, which you should be running to get as many features and as few bugs as possible. Most of the older (and especially the very buggy) versions are not available online for that reason.]

Without an operating system, you can't run a comm program to download the operating system, so you're in a bit of a quandry. One method is to call 1-800-SOS-APPL and try and find an Apple II user group in your area. They should be able copy things for you.

If you are unable to find a local user group, one of the next best options is to contact Steve Cavanaugh (section 10.2), who is licensed to copy ProDOS 8 [runs on pretty much all Apple IIs with at least 64K of RAM], along with a 5.25" disk full of comm programs, etc. The comm program disk costs only $3, which is a great deal. Ask him for more details if interested.

Alltech Electronics (see FAQ section 10.2) is licensed to sell many of the above, such as GS System Software 5.0.4 and 6.0.1, Apple // System Disk 4.02, and ProDOS 1.1.1. Contact them for details on pricing, etc.


How I connect my Apple II to an Appletalk (and/or Ethertalk) network?

A: Appletalk support is pretty much available for the //e and GS only; the functionality never made it into the ][, ][+, //c or IIc+ models.

Appletalk software on the Apple II will allow you to connect to 'Appleshared' volumes on server machines (Macs, WinNT4.x, and many unix platforms), and also certain printers shared on the network; there is no current way for Apple IIs to share their local drives to any other Appletalked boxen. Also, note that you'll need some sort of Appletalk to Ethernet gateway if you want to use Appletalk with any non-Apple hardware; see next section below on Ethernet.

Filesharing over Appletalk is possible if the non-Apple II machines share their drives. Macs can do that with System 7.x and 8.x's personal filesharing; see the documentation and online help, as this is outside the scope of this FAQ. Windows NT 4.0 is reported to support Appleshare also (see its docs and help again); Unix machines can use the 'Columbia Appletalk Protocol or for for Linux, see http://thehamptons.com/anders/netatalk/. [Netatalk supports sharing volumes and printers]. To access shared volumes, turn the sharing on the host machine, and from the GS, use the 'Appleshare' graphical control panel to connect up.

Booting an Apple II over Appletalk is not a trivial task, even though the System 6.0/6.0.1 include "disks" to support it. To boot an Apple II over Appletalk, you must also own Apple's Appleshare 2.x or 3.x software for Macs; 1.x or 4.x (and anything newer than that) won't work. This software reportedly cost near $1,000 new; while you may be able to find it for less nowadays, the cost and slowness of Appletalk may not make this worth it. You may either want to boot the GS off a 3.5" and run applications from an Appleshared volume, or invest in a HD for the Apple II (Alltech Electronics has 20MB HDs for $59 as of 8/19/97, which will prove far faster and overall more useful).

Some printers can be connected to an Appletalk network; Imagewriter IIs with an addon board (either Apple's board or Sequential System's 'MegaBUFF'/'Q:Talk lto' boards) can be networked, as can all Apple Laser printers supporting PostScript and the Appletalk serial port. Although several inkjet printers support Appletalk (various Stylewriters and HP Deskwriters), there is no GS support for them over a network, even if they'll work when directly connected.

To get Appletalk running on a //e, you will need a //e Workstation card, which provides an Appletalk port, and the associated software, which is bundled with it. That way, you can connect to an Appletalk network and use shared drives and/or printers. Once that is ready, install the Appletalk software.

From a GS, Appletalk is slightly more complex in terms of deciding which slots you want to dedicate to it. In a ROM 01, Appletalk requires turning slot 7 to 'Appletalk' (use the control panel, accessible by pressing Control-Open Apple-Escape), and either one of slots 1 or 2 set to 'Your Card'. If you have something in slot 7 that you care about (usually a hard drive controller), what you can do is move that card to slot 1 or 2, and set the boot slot to 1 or 2. A ROM 3 is simpler-- set one of slots 1 or 2 to Appletalk. The Appletalk cable plugs into the back of your GS in the printer port (ROM 1 if slot 1 is 'Your Card', ROM 3 if slot 1 is Appletalk) or the modem port (slot 2 is Your card/Appletalk). Once the GS is set up, from the System 6.0 or 6.0.1 (recommended) installer, select "Custom Install" and then select the Appletalk, Appleshare, Appletalk'd Imagewriter and/or Laserwriter packages to install.

Once you have Appletalk set up on the various machines, you'll need to decide how to connect them. If there are only 2 machines and both are connecting via the serial port, a printer (i.e. null modem) cable between the two will suffice. If you want to connect more than two devices, you can use either Apple's Localtalk wiring scheme (expensive and pretty much phased out) or the 'Phonenet' style connectors that let you run ordinary phone wire between the different machines. Look for phonenet hardware at computer stores or mailorder catalogs.

Unfortunately, the serial ports in Apple's Super Serial Cards, //c and IIc+, and PC clones' serial ports are not capable of putting out Appletalk signals. From a PC, you'd probably have to find one of the rare (and therefore pricey) PC Appletalk boards that exist. As ethernet (and TCP/IP to a lesser degree) has taken over the Unix, PC and Mac networking setups, see the next section (7.4) below for some possible workarounds.


Is there any Ethernet capabilities for Apple IIs?

A: There is no publically available Ethernet setup for any Apple II model. There are also rumors of an independently designed Ethernet board, but it's not released.

There were several models of Appletalk <-> Ethernet gateways that can be used to connect up Apple IIs to Ethernet networks for use in a mixed network of Apple IIs, Macs, PCs and unix boxes. Shiva's FastPath 4 or 5 have been recommended as working well in this capacity.

(Apple designed and made an ethernet card to be released at about the same time as GS/OS 6.0.1, but canned the project when they decided to try and write off Apple IIs as a bad memory, and shoved the cards produced in a warehouse or worse. Fewer than five of these cards are known to be owned by people outside of Apple. That's very stupid, considering Apple could have made a nice profit on those things. Don't ask me where to get one of those; I don't know, and if I did, I'd get one for myself before telling any of you-- Nathan :) Tony Diaz has a web page up with more details on this card; check out http://www.hypermall.com/~tdiaz/AIIEthernet.html. [While this card had OS-level support (until they axed that code along with the card) for Ethertalk, since Ethertalk is merely Appletalk packets over Ethernet, this card is therefore an Ethernet card])

There are a number of SCSI - Ethernet transcievers available for Macs and the like, but they are EXTEMELY unlikely to work at all on the GS. Essentially, the RamFAST SCSI card does not support interrupts or devices feeding it data. In addition, all of these transcievers use proprietary (and info is not publically available) protocols.


What is 8 bit and 16 bit?

A: That indicates how big the chunks of data are that the CPU can manipulate at once. The Apple IIGS is a 16 bit machine and all other Apple ]['s are 8 bit machines. (It is possible to put a 65802 (extremely rare nowadays) as a replacement for a 6502 or 65C02, and get limited 16 bit functionality, but as the GS has a lot of extra chips to support what it does, you still would not be able to run 99.9% of GS software on such a machine)


How can I tell what version my computer is?

A: Look at the case of the computer to determine which Apple II you have, then in the section on Apple II model information (sections 2.x) for that model. The methods of determining the versions of each model are integrated into the other information for that model.


How much RAM is in my Apple II?

A:This is easiest to determine with an Apple IIGS. Go to the text control panel by pressing the control, open apple, and escape keys at once, then select the RAM Disk option under the Control Panel option. Note the 'Largest Selectable' entry, and add 256K to that-- that's how much RAM is available to GS programs. (The GS reserves a minumum of 256K for programs, though pretty much only older Apple II software will run in that space). Note that this does not count ram on cards in slots 1-7, though you're pretty much limited to only using RAM Disks or Appleworks addons in there.

With earlier models of the Apple II, this is a much more difficult problem, because any software that wants to take advantage of extra RAM has to be written to recognize any RAM past the first 64K of memory. [Applesoft BASIC, for example, only cares about the lower 48K of RAM unless you use addon packages.] As noted in the sections on Apple II models above, the system has a default of anywhere from 4K-128K built in. The extremely common 'Extended 80-column card' for the //e added 64K to the //e's default 64K.

Most Apple II RAM cards did come with a diagnostic disk and possibly patcher programs to allow them to determine how much RAM is in the system, as well as allowing programs like Appleworks access to the extra RAM. If you suspect you have more than the defaults, but can't be sure, asking on comp.sys.apple2 is probably the best bet.


Can I use High Density disks on my double density Apple II drives?

A: Only if you don't care about what's written to them. Basically, the magnetic properties of High Density disk media is different, and though you may be able to write to them and immediately read it back, after a few months, odds are pretty good that the disk is unreadable. In short, I strongly recommend not using anything other than Double Sided, Double Density (DSDD) disks in Apple II 140K 5.25" drives.

Some people report that they have successfully used HD 3.5" disks in their 800K drives without problems, while others have had some problems. Use them with some caution; as with everything else, making sure that there are adequate backups of all files you care about is a good insurance plan in case of any problems.

Of course, should you have a high density drive (1.2MB 5.25" or 1.44MB 3.5"), then use high density disks in it. Although the local computer store may not carry DSDD disks, many national mailorder places do carry them. Check them out.


Why do partitions have a maximum size of 32MB?

A: ProDOS, the usual choice for Apple II disks (Hard Drives, CD-ROMs, etc), is limited to 32MB per partition. It would require rewriting large chunks to get it to work with larger partitions. Just use the partitioning tools (included with the SCSI card or the like) to make several 32MB partitions.

If you have a GS with System 6.0, you can install the HFS FST (you must do a customized install, not the Easy Update), which lets you have partitions larger than 32MB. The System 6.0.1 HFS FST should have the patch applied to it before it is used with volumes larger than 64MB, but I (Nathan Mates) have had volumes corrupted and don't really trust the HFS FST. (See the System 6.0 Minifaq in this FAQ for details on where to download the patch.

The differences between HFS and ProDOS are as follows:

ProDOS partitions: Limited to 32MB, your boot (first) partition MUST be a ProDOS volume. Disk integrity checkers exist (ProSEL by Charlie's Appleseeds, Salvation by Vitesse) to make sure your disk remains uncorrupted as possible.

HFS partitions: Requires GS/OS System 6.0 or higher, and therefore 1.5MB RAM. You can not boot a HFS disk on an Apple II. Maximum volume size is either 2 or 4 gigabytes (pretty darn big either way). System 6.0.1's default HFS FST has bugs that are know to corrupt disks >64MB; even with the Apple-approved patches it may not be stable. The only way to verify that a partition is uncorrupted is to take the HD to a Mac and run Apple's Disk First Aid or Norton Utilities on it-- no GS HFS disk verification programs exist.

Keeping good backups of your files is a real lifesaver when problems happen, no matter what filesystem they're saved to.

As a side note, DOS 3.3 volumes are limited to 400K each; my having multiple 400K volumes per disk (same theory as multiple 32MB partitions on a HD), patched DOS 3.3s can access up to approx 100MB (254 volumes * 400K each) at once. Such patches are not really available to the general public to my knowledge, however. There were a few DOS 3.3 patches that let them use 2 400K volumes on a 800K drive, though I've never used them.

How do I convert from an Appleworks file to a text file without formatting codes?

Appleworks lets you 'Print' to a file on disk-- hit Open-Apple-P, and select "A file on disk." That should do a reasonable job of translating the Appleworks file into text without formatting such as boldface and italic, but leaves in the centering.

Others have reported that setting up a special printer entry can yield slightly better results. (The exact procedure for that depends on the version (1-5) of Appleworks. Consult your manual for more information.) Make a new printer, which is identified as a 'Silentype' printer, but prints to disk. Make sure the printer interface code is empty.


What programming languages are available for the Apple ][?

A: Larry W. Virden (lvirden@cas.org) maintains The Apple II Programmer's Catalog of Languages and Toolkits. The official version is at http://www.teraform.com/~lvirden/Misc/apple2-languages.txt.


Can I install DOS 3.3 stuff on my hard drive?

A: This mostly depends on what you're trying to do. As noted in the section on HD partitions above, DOS 3.3 volumes are limited to 400K each. Thus, they can be highly inconviencing trying to put those on a regular HD. (And no publically available software really exists to do that)

A far better solution is to use DOS 3.3 Launcher. It lets you copy unprotected DOS 3.3 140K disks to your hard drive, and run DOS 3.3 under ProDOS. Such functionality does have some requirements, though: programs must only use 48K of RAM (the upper 16K is reserved for ProDOS, which is running at the same time), not do any copy protection or disk hackery, and generally behave themselves. DOS 3.3 Launcher is available from the normal Apple II ftp sites: ftp://apple2.caltech.edu/pub/apple2/utils/dos3.3.shk


Is there any form of Unix that I can use on my Apple II?

A: Yes, a pretty good commercial variant exists, but only for the GS: Procyon's GNO/ME. Since the GS (nor any other A2 model) doesn't have any form of memory protection or virtual memory, and the 65816 is limited to a maximum of 64K of stack space, programs that assume they can use whatever amounts of ram they want (gcc, X Windows, etc) can't be run at all.

New info as of 8/16/97: GNO/ME v2.0.4 has been reclassified by Procyon to be freely copyable; it is now available for download from ftp://ftp.hypermall.com/pub/gno or http://www.gno.org/pub/apple2/gs.specific/gno/base204/ . Online documentation can be found at http://www.gno.org/gno/ .

GNO/ME runs on top of GS/OS, so you can multitask text-based programs with at most one GS desktop GUI program.


Can I generate Postscript from my Apple II?

A: The GS most certainly can with the right software; certain packages like Publish-It (at least versions 3 and 4; maybe also earlier versions as well) for the //e or //c also have such functionality. The GEOS family of programs for the Apple II can also generate postscript, but those programs are not available anymore to my knowledge [I believe that maybe the Springboard Publisher can do that also; more info would be appreciated]

To print to a postscript file on the GS with any program that follows the GS's methods for printing (Print Shop GS and pretty much all non-GS programs won't work), install the Laserwriter driver to System 6.0 or 6.0.1. You do not need to have a Laserwriter; just install the driver. [This will install Appletalk as well; to avoid the annoying message about Appletalk not being available at boot, disable the 'SCC.Manager' file in the drivers folder inside the system folder on your boot disk.]

Once this is done, select the Laserwriter as your printer driver. Select 'Print' from within a GS application, and at the standard dialog which appears, do not press return to print. Instead, hold down the Open Apple and 'f' keys while you click on the 'OK' button with the mouse. That will force a print to disk. The resulting postscript file is saved to the Drivers folder inside the system folder on your boot disk with the name 'Postscript.GSxx', with 'xx' being a 2-digit number that starts at 00. You can then take the postscript file to another system and view or print it.

The Laserwriter driver from System 6.0.1 may not be compatible with all Postscript printers (especially the non-Apple ones); if you're having problems, you may wish to try using the driver from System 6.0.

Note that the GS's Laserwriter driver does not properly handle Truetype fonts in documents (which requires 'Pointless' from Westcode Software), so you may want to use only the fonts your postscript printer knows. [Those lists vary; everything knows Times, Courier and a few more, but check your printer's manual for info on what it supports.]


How do you copy from a 5.25" disk to 3.5" disk?

A: ProDOS has no problems with this, as long as you copy by files. Note that ProDOS can only have 51 files in the main directory. If you try to exceed that, it will give you a cryptic 'Disk Full' error. If there really is space left on the disk, you can copy all the files into a subdirectory to get around the 51-file limit. Subdirectories can support more files in them than any ProDOS volume has to store them as different files, but in practice, you should limit them to a few hundred files per directory.

Copy protected 5.25" disks and DOS 3.3 programs tend not to want to copy to other disks. You may have to put up with them as is.


My Apple II is running too fast. How do I slow it down?

A: If you have a GS without an accelerator card, use the builtin control panel (accessible by hitting control-open apple-escape at once or holding down the 'option' key on poweron) to change the system system between 'Normal' (1Mhz, same as a stock ][, ][+, //e, or //c) and 'Fast' (2.5Mhz). With accelerators installed in the GS, the 'Normal' speed still means 1Mhz, but 'Fast' is whatever the card is set to run at. The Transwarp GS has in its ROM a CDA (accessible from the text control panel as above) for configuring the speed; the Zip GS has both official and 3rd party (better) utilities to configure its speed in 16 levels.

Pre-GS accelerators (AE Transwarp models, Zip Chip and Rocket Chip, among others) tended to be disableable if you held down the 'Esc' key when the system [re]booted. That would drop the system back to 1Mhz until the next [re]boot and/or poweron.


Strange problems:

How do I get out of Basic (that little "]" prompt and cursor?

A: Type the word "BYE" and press return. For more information on Applesoft, see Nathan Mates's Applesoft FAQ at http://www.visi.com/~nathan/a2/faq/asoft.html You can also get more information on DOS 3.3/ProDOS commands at http://www.visi.com/~nathan/a2/faq/dos.html


What are the problems with GSCII?

A: GSCII is a great program, but has two subtle problems: First, it won't work correctly if you extract to a HFS disk (so extract to a ProDOS disk). Also, it won't set the size correctly on S16 files. This should only be a problem when downloading Shrinkit GS. In that case, use BINSCII. The rest of the time you will be extracting .SHK files, which don't care about extra bytes at the end.


AppleWorks won't print to my printer. What gives?

A: AppleWorks will refuse to print to a slot that has a disk device. In the past, this worked well because if you try to print to a slot that has a disk controller in it, you will re-boot. But now, this can cause problems when a disk device is 'mapped' into your printer slot (due to a limitation in ProDOS, you can only have 2 drives per slot. Extra partitions on your hard drive will be re-mapped to other slots). If you have a RamFast, you can re-map the drives to different slots. Otherwise, (for AW 3.0) use this patch:


POKE 768,128: POKE 769,10 BSAVE APLWORKS.SYSTEM,TSYS,A$300,L2,B$AE3

If you didn't understand that, e-mail me, or look into John Link's SuperPatch program, which includes many more patches.


My GS control panel keeps resetting to the defaults and/or forgetting the date-- the battery is dead.

A: It's probably your battery. If you have a ROM 03 GS, can you just pop it out an get another. On the ROM 01, you will need a Slide-On Battery Replacement Kit from Night Owl Productions. See address in hardware & software vendors section (10.2).


I'm getting Error XXXX or YY. What's it mean?

A: Some common errors and their cause:

A larger list of all error messages, but not always the best description of the cause is at http://www.visi.com/~nathan/a2/faq/gserrors.html.

ProDOS Errors:

UNABLE TO LOAD PRODOS - You can't boot a disk unless it has ProDOS and a something.SYSTEM file on it (Pre-1.9 ProDOS)

Error No.
Meaning
$27 I/O Error. Possibly a bad disk? Verify it with Prosel or Copy II Plus
$44 Path not found (You gave an invalid directory name)
$45 Volume not found (you didn't type in the right disk name)
$46 File not found (you didn't type a valid filename)

GS/OS errors:

Error No.
Meaning
0201 Out of memory
0911 Either your GS is overheating, or the ADB port is having problems
0301 Bad TransWarp
0308 (Also see 8021) Something has trashed critical parts of memory
11xx GS/OS could not successfully load an application or program
8020 Either random TransWarp, or SCSI (try using different SCSI connector)
8021 If you get this at random times and you have a HS Apple SCSI, it's
probably a version conflict. Install the SCSI drivers from your GS/OS
disk, not your HS Apple SCSI disk.


Why does my Apple II lose characters when I'm using the modem?

A: Check the following: 1) Your software may need interrupts enabled. Examine DIP Switch 2-6 on your Super Serial Card. 2) If you have an unenhanced //e, you need to enhance your //e. 3) If you have a //c, it may be one of the ones that had a serial port problem. Talk to your dealer about upgrading it for 2400 baud support. Also, to use a modem faster than 9600 pretty much requires a 'Hardware Handshaking' cable, not a cheap one.


Where do I get support for AE boards now that they are closed?

A: Bruce BABB, ex-AE bench tech, is offering support out of his home for customer support of AE's boards. He also hints that another company is opening that will sell many of the Apple II products the AE made. You can reach Bruce via Email at 76004.1575@compuserve.com

Is there a QWK reader for the Apple //e?

A: Yes, it's called 2qwk!. To use 2qwk! you must patch ProDOS to allow filenames sent by MS-DOS machines. The Apple II version is now available via ftp from ground and caltech.

I've got a problem. How do I troubleshoot it?

  • Asking others for help is fine, but if you do, please provide the following information. (And the act of finding out this information may help you find the cause on your own)

1. Is it reproducible? One system crash that happened out of the blue and never reoccurred is almost impossible to track down and fix.

2. When did the fault appear? During boot? After a fixed amount of time? Whenever you do X in program Y?

3. Any and ALL error messages reported by the system. Copy them down and repeat them exactly; saying "it gave an error" is not useful.

4. How dead the system is. Does the mouse still work, but clicks do nothing? Does it do anything at all?

5. System configuration. What cards in what slots, how much RAM, which SCSI controller and rom version (if applicable), what size HD, etc.

  • If you have just purchased a bunch of new hardware and/or software, resist the temptation to install all your new toys at once. Take it one step at a time and test everything after adding each item. (i.e. Run the diagnostics and try your old programs.)
  • If you have an enhanced //e, //c, IIc+, or GS, try the system self-test: hold down the Control key, the Open Apple key, and the Option (or Solid Apple) key. Then press and release Reset. Lastly, let up on the other keys. Sit back and 'Watchen Der Blinken Lighten.' If you run into a problem, please see the next section on self test errors and what they mean.
  • Leave the computer plugged in, but turned off when installing cards. Touch the top of power supply before and often during your work. Better yet, use a wrist strap tied to ground through a 1 Megaohm resistor.
  • Make sure you have the required components for the program. Does it require an Enhanced //e? More RAM? A separate boot disk?
  • Never use your original disks. Make a backup and store the write-protected original in a safe place.
  • Be sure to keep your disks away from stray magnetic fields, such as those emanating from phones, monitors and speakers.
  • If you have an accelerator, try to disable it or take it out entirely. It may not be compatible with the new item. (This is actually rare; the one consistent thing accelerators have problems is the GS's self test)
  • Check all your cable connections. Do not disconnect or connect any cables with the computer on-- this includes disk/hard drives, keyboards, mice, etc.
  • Try pulling out other cards and disconnect your joystick. If you have a lot of cards, you might consider a Heavy-Duty Power Supply from A.E. It supplies 6 Amps instead of a measly 2.5 Amps. Test the power supply with a voltmeter while the computer is on.
  • Call the manufacturer to see if there is an upgrade or a fix with the program.
  • Most RAM cards come with a memory tester. Try running it in continuous mode for several hours, even if your RAM seems to be working.
  • Verify your disk(s) with Copy ][+ or the Finder to see if you have any bad blocks. A better choice is ProSEL, which provides a comprensive set of disk verification and fixing errors.
  • On a GS, check your control panel (control-open-apple-escape) settings: What is the startup slot set to? Is the slot set to "Your Card"? Check your RAM disk setting. Is it taking up all your memory? Try setting the speed to normal if it's a non-GS program.
  • On a GS, try take out or disable your INITS, CDAs, NDAs, and CDEVS. (With System 6, just hold down the shift key while booting). If the system is fine when shiftbooted, then there is probably a conflict between some of them. Try manually disabling a few at a time, and seeing if the problem disappears. You can narrow down a problem to an init or few that way.
  • If you have a hard disk, try booting from a System Disk and/or reinstalling the latest system software. Using the installer that came with the system software the the best and safest way to install system software; hand installing parts can cause problems.
  • AppleWorks GS 1.1 comes with a memory tester (try it).
  • The TransWarp GS has a continuous test on the CDA (try it too).


My GS reported a problem with the Self Test. What do the numbers mean?

The full list with explanations of these codes are available in Apple's technotes, archived here at http://www.visi.com/~nathan/a2/tn/iigs/095.html or ftp://ftp.apple.com/dts/aii/tn/iigs/tn-iigs-095. In short, the error code should be an 8-digit number in the form AABBCCDD. Look at the AA number, and check the following table:

Test No.
Test Name/Section
01: Failed checksum in motherboard RAM/ROM.
02: Failed ram on motherboard.
03: Failed softswitch and register test.
04: Failed RAM address test
05: Failed Speed test
06: Failed serial port test
07: Failed clock test
08: Failed Battery RAM test
09: Failed Apple Desktop Bus (ADB- usually keyboards & mice) test
0A: Failed shadow register test
0B: Failed interrupts test
0C: Failed Sound test


Please note that with a Zip GS in the system, the system will always report an error, even if none exists. You will get an 05xxxxxx if DIP switch 1-4 is ON, but if that's off, you're likely to get 0Bxxxxxx (not on all Zips) or 0Cxxxxxx errors. If you suspect a real problem, then you can either switch off the Zip (1-6 off), or remove the Zip from the system and try with the normal processor. Do all modifications to DIP switches or cards in general with the computer off, as usual.


My Apple II goes into a self test or reboots when I turn it on.

Try unplugging any joysticks, paddles, or anything else plugged into the back joystick port or the internal game port. Since the primary and secondary joystick buttons appear the same to the system as the open and closed (option on the GS) apple buttons, if your joystick's buttons are misreported as down, the system can assume you're trying to continually do a self test. If your system works without the joystick plugged in, your joystick is defective.

This is a general rule of thumb for troubleshooting, as noted above. Pull out EVERYTHING not needed for the problem (go down to computer, monitor, and optionally the keyboard for the base problems), and slowly add components until the problem reappears. When it does, you've isolated the problem. [As usual, only plug or unplug devices with the power off.]


My Hard Drive (or other disk) crashed! What do I do?

If you have adequate backups, reformat it, and copy the data back. If you don't have backups, this would be a good time to start praying. Dead disk recovery is a delicate art at best; be forewarned that there is a good chance that some to all data will be lost.

Reminder: Keep good backups of any files you care about!

There are two commercial programs that can do a decent job at recovering as much as possible from a ProDOS disk: ProSEL (8 and 16 bit versions published by Charlie's Appleseeds) and Salvation: Deliverance (published by Vitesse). ProSEL-8 is the only package that runs on non-GS Apple IIs, so it may be your only choice. ProSEL-16 and Salvation both require GSs.

Refer to their manuals for the specifics on how to attempt volume restoration with them, though from what I've heard, they have a much better chance of restoring files in subdirectories, not the top-level directory. Thus, it may be prudent to store important files in subdirectories so that they can restored later. [With a limit of 51 files in the top directory, you'll be forced into using subdirectories sooner or later on hard drives.]

If you managed to repartition or erase your drive, at least with ProSEL (and possibly also Salvation, though I have not used that or heard from any owners), you have a decent chance of restoring most files if you repartitioned it EXACTLY as it used to be partitioned: same partition sizes in the same order. Do NOT reformat the drive or partitions-- that'll write to all disk blocks, which will make recovery essentially impossible. Then, run ProSEL on it and tell it not to assume a valid volume bitmap for each partition. You'll probably lose files in the root directory, but it's a better than nothing.


My Apple II is reporting the wrong year. How do I fix that?

First, if you have a GS, and the internal clock is reporting the wrong year each time you boot up, you probably have a dead battery. See section 8.4 for where to get a replacement.

ProDOS 8 does have a problem in its year calculating code-- the designers assumed that a table holding only 6 years would be sufficient. They were wrong. You'll have to patch ProDOS every few years to keep it up to date; a text file including a Basic program is on Apple's FTP site: ftp://ftp.apple.com/dts/aii/sys.soft/slotclock-patch.txt

The above is a Applesoft Basic source code inside a text file; you may want to instead download the program included on the latest ProDOS 8 system disk: ftp://ftp.apple.com/dts/aii/sys.soft/8bit.system.4.0.2/sysdisk402.bsc


My RamFAST board is reporting an error. What's the number mean?

Here's a list of the RamFAST Fatal Memory Fault codes:

Code
Meaning
$00 Unknown, probably means that the RamFAST is very confused
$01-08 DRAM memory test failure
$09 EPROM checksum failure
$0C Z180 processor crashed, indicates some hardware fault
$0D Error writing cache data to disk
$0E Termination power error


What does "UNABLE TO LOAD PRODOS" mean when I boot a disk?

ProDOS is not automatically installed on every disk formatted under ProDOS. All that is writted to disk is a very short boot stub that looks for a system (type 'SYS') file in the root directory called 'PRODOS'. If that file is present, it is loaded, and ProDOS installs itself. If there is no PRODOS file found, the error message of "UNABLE TO LOAD PRODOS" is displayed on the screen.

To make such a disk bootable, all you need to do is copy the file 'PRODOS' from a working ProDOS boot disk to the root directory of the disk you want to be able to boot from, assuming there is enough free space to copy that file.

You will also want to copy at least one other system (type='SYS') to the root directory of any disk you want to boot, as ProDOS scans the root directory for the first SYS file with name ending in ".SYSTEM" to execute, or it'll be unhappy. A good candidate for such a file is Apple's "BASIC.SYSTEM", providing the Basic interpreter and command line interface to ProDOS.

If you choose to use Macs and Disk Copy to download System 6.x, make sure to use Double Sided/Double Density (DSDD - 720K or 800K) disks-- 1.44MB (HD) disks will be written to as 1.44MB disks, which most GS drives cannot deal with. Also, if your GS is refusing to boot off the install disk (with an 'UNABLE TO LOAD PRODOS' message), and you have a Quadra or Powermac, you may be a victim of Apple's costcutting in 3.5" drives-- those drives may report disks as successfully written, but GSs will be unable to read them. Switch to an older Mac with a usable drive, or use a null modem program to transfer the files.


GS System 6.0 mini-FAQ

Where can I get System 6, and what fixes are there for the known bugs in it?

First off, if you don't have it on your GS, you may want to consider upgrading to System 6.0.1. Like all GS/OS releases, you will need to make sure you've got a ROM 01 or ROM 3 before you even think about running it. Although you may be able to get it to boot in less RAM, 1.25MB of RAM is pretty much a minimum; 1.5-2MB RAM is recommended if you want to run a lot of the fun addons. Secondly, an 800K floppy is rather cramped for space as a boot disk; a Hard Drive helps immensely. (If you're looking to strip a boot disk down to get as much space as possible, please see my reference of files in the GS/OS installation at http://www.visi.com/~nathan/a2/faq/sys6files.html.)

System 6.0.1 has a number of bugfixes and small addons from System 6.0; they both have similar RAM requirements, so you should consider moving to System 6.0.1 if at all possible. Also, many problems that existed in System 6.0 and 6.0.1 have only been fixed in patches to System 6.0.1, such as the HFS FST and programs that GUPP fixes. (See below)

Next, you'll want to download them. On the internet, they're available in Apple II (.BSQ) form from Apple's FTP site at ftp://ftp.apple.com/dts/aii/sys.soft/gs.system.6.0.1/. There are 6 disks to either System 6.0 or System 6.0.1; you should download and unpack them (with Binscii and Shrinkit. Then, boot the Install disk.

When unpacking the .BSQ files from Apple's FTP site without a hard drive, you'll notice that some of the disks can be larger than 800K, even when partially unpacked. Creating a Ramdisk from the control panel greater than 800K will let you unpack these big disks without any problems. (Remember to kill off that ramdisk before trying to run GS/OS if you have less than 1.5MB of RAM)

If you have access to a Mac with "Disk Copy", you may want to instead try downloading the disks in that format from ftp://ftp.apple.com/Apple.Support.Area/Apple.Software.Updates/US/Apple _II/Apple_IIGS_System_6.0.1/

If you choose to use Macs and Disk Copy to download System 6.x, make sure to use Double Sided/Double Density (DSDD - 720K or 800K) disks-- 1.44MB (HD) disks will be written to as 1.44MB disks, which most GS drives cannot deal with. Also, if your GS is refusing to boot off the install disk (with an 'UNABLE TO LOAD PRODOS' message), and you have a Quadra or Powermac, you may be a victim of Apple's costcutting in 3.5" drives-- those drives may report disks as successfully written, but GSs will be unable to read them. Switch to an older Mac with a usable drive, or use a null modem program to transfer the files.

While a little too big for this FAQ, Nathan Mates has written a reference detailing the various files installed by System 6.0.1 with comments on their use, as well as which files are required for minimal disk usage. Please see http://www.visi.com/~nathan/a2/faq/sys6files.html.


Common Problems

If you are still using System 6.0, it is recommended that you upgrade to the latest and greatest version, 6.0.1. It is available at Apple's FTP site (see section for the address).

The HFS (Macintosh) FST (File system translator) included with System 6.0.1 does contain at least one bug, which can corrupt a HFS volume of 64MB or larger. It is strongly encouraged that you download and install the patch. (You'll need to copy all the files off to non-HFS volumes, install, and copy back for safety). The patch is available from ftp://apple2.caltech.edu/pub/apple2/addons/patches/patchhfs.shk

I (Nathan Mates) have had HFS volumes corrupted, so I'm pretty confident that there are more bugs in the FST. There are no native GS HFS volume checkers; you'll have to take the drive to a Mac anytime you need to run a checker such as Apple's Disk First Aid or Norton Utilities. (Also, Macs want a special driver, which may require you to [re]format the drive on a mac, or use a special program to insert it. This boils down to the general computer rule of thumb: If you care about your files, make sure you have backups!

Despite the hard work of the Apple Computer programmers, some bugs slipped through in System 6.0.1. Both as a recommendation for system stability, and as a plug for a program of his, Nathan Mates (maintainer of this FAQ) has found and fixed a number of them. These include memory trashing bugs in the 6.0.1 Finder, the Pascal FST not recognizing legal punctuation in disk names, and many more. Get the free program 'GUPP' (Grand Unified Patch Program) from a major Apple II FTP site, or directly from Nathan's ftp site for his programs: ftp://ftp.visi.com/users/nathan/a2software/gupp.shk

Copy ][+ may be a great program for making the one personal backup copy of a piece of software that you are legally entitled to, but its file copy, delete, and directory sorting functions will corrupt a disk when used on a directory with GS/OS 'forked' files. (Pretty much all of the system software is forked, as are most GS applications). Do NOT use it on disks or HD partitions with such files. ProSEL 8 or 16 can repair some of the damage done, and provide safe disk and file utilities.

If the mouse cursor wipes out everything it moves over, you may have a software conflict with Closeview. To deactivate it, from within the Finder, open the 'System' folder on your boot disk, then the 'System.Setup' folder. Find the icon named 'Closeview', and click once on it. Then, from the 'Special' menu, choose 'Icon Info...'. A window will open up, with a check box for 'Inactive' in the top right. After setting it to inactive, reboot. You can do the same thing for any other Desk Accessory, Control Panel (CDev), or Init (in the System.Setup folder, should you decide not to want to run it.

Easy Access also can and does cause lockups with programs, especially on the ROM 01. Deactivate it just like you did with the Closeview program-- it's in the same folder.

If you are getting an annoying message about Appletalk not being available at boot, but you're not using Appletalk in general, disable the 'SCC.Manager' file in the drivers folder inside the system folder on your boot disk.

Missing features of system 6? Perhaps you just used easy install, which doesn't install all the bells and whistles. Try clicking on the 'Custom' install (versus the easy install) in the Sys 6.0 installer and add the nifty things like Calculator, Find File, HFS FST, etc. You can also read the Shortcuts file on the 'SystemTools2' disk for some great keyboard shortcuts.

Finder 6.0 icons that match by name and have a leading wildcard require uppercase letters. For example, a name like "*.txt" never matches, but "*.TXT" works fine (it matches regardless of a file's actual capitalization). (This was accidental; the 5.0.4 Finder did not care about capitalization in icon files.)

Two misconceptions about System 6: The A2.RAMCARD is not for the GS's /RAM5. It only works with "slinky" (i.e. standard slot) cards. Also, the DOS 3.3 FST has nothing to do with MS-DOS.


Tips & Hints

The AppleShare logon programs have always looked for a folder named "Mail" inside your user folder whenever you log onto a user volume. If there's any items in there, they present a dialog that says "You have mail." With the Sounds control panel, you can make it play a sound of your choice then.

If you don't want to see your icons on boot, set bit 1 (i.e. the 2nd LSB) of BRAM Location $5F. Be sure not to mess with the other bits. Use the toolbox calls!

The FinderExtras folder goes in the same folder as the Finder (generally the System folder).

If you don't like yellow folders in the Finder you can change the byte at offset +65 in the Finder resource with type $C001 and ID 1. Change the $E0 to whatever you want (the first digit is the default folder foreground color, and the low nibble is for the outline color). Only folders that do not already have a color recorded in a Finder.Data file get the default color.


If you have a RamFAST

The RamFast and ProDOS 2.0.1 both try to do re-mapping of drives to unused slots. This can cause problems, mostly when launching and returning from ProDOS 8 applications (crashes or wants you to insert disk). Solution: Configure the RamFast not to re-map. If you have a RamFAST with a ROM revision less than 2.01a, you need to get a newer ROM from Sequential Systems. Otherwise, V2.01c allows setting Slot Priority Allocations to 0 which will let ProDOS deal with them. V3.0 allows you to choose between RamFast mapping (works now) and ProDOS 8 mapping. If you can't wait, you can Patch ProDOS 2.0 not to re-map slots. Look for "10 BF C9 A5 D0 07" and change the $A5 to $00 (should be byte $1A3 in the 5th block of the file). Hack at your own risk.


If you have a Vulcan or AE High Density disk

Due to problems with the Vulcan, when booting, it asks for your System Disk. Just put the Vulcan driver on your boot disk, boot it, and then launch the installer. Alternately, put the driver on the installer disk and boot it. (but you have to delete some of the installer scripts first) For the AE High Density Drive, be sure to remove Apple's 3.5" driver when putting on AE's.


If you have ProSel as your program launcher

Rename start to something else before running the installer, or else the Finder won't be installed. Also, ProSEL as a launcher will cause a bogus $0040 error on some programs such as the first DOTW release.


If you have an AMR 3.5" drive

If the computer hangs (mostly at the Standard File Save/Open dialog box) with no disk in the drive, try putting one in. What's happening is that GS is reading the status from the drive, and the drive won't return anything unless there is a disk in the drive. Just stick a disk in and all will be fine. If it really annoys you, either deactivate the 3.5" driver (get IR so you can double-click to re-activate it) or simply keep a disk in the drive at all times. This is not a problem under ProDOS 8.


GSCII+ & HFS Note

There is a problem with the HFS FST, but only GSCII seems to be affected. When de-binscii-ing files, put the output onto a ProDOS volume, not an HFS one.

[ Mega-thanks to Dave Lyons & friends for these. ]


Finder 6.0.1 is displaying garbage in the windows!

System 6.0.1's Finder occasionally gets some of its files corrupted, and then fills a window (or the screen) with multicolor garbage when a window is opened. This is extremely annoying, but there are ways to fix it. First, try installing Grand Unified Patcher Program (see the section above (9.1) on system 6.x patches).

If that doesn't work, go to the 'Preferences...' menu item under the Finder's 'Special' menu, and turn off the hiding of invisible files. Inside the 'Icons' folder on each disk/partition, there's a file called 'Desktop'. Trash it, and reboot. [This file contains window sizes and custom icon placements, as well as duplicate copies of icons from System 6-savvy applications with 'rBundles' attached. No real harm other than losing the window placements is done by trashing it.]

Lastly, you can look for bad icon files-- make a new folder (such as 'Icons2') on each hard drive, and move all files except 'Ftype.Apple' out of the Icons folder on each disk/partition to the new folder. Reboot and see if the problem still occurs. If not, move a few files back at a time, reboot, and see if you have the problem. When you've isolated the problem file, don't use it anymore.


Icons no longer point to apps. How do I rebuild the desktop database?

Easiest way: from Finder, go to prefs, turn off hide invisible files. In each disk partition's 'Icons' folder, there should be a file named 'desktop'. Delete it. That'll just force a new desktop database file to be created next time you start the Finder; you'll still have to click on each file that put its rBundles into there to rebuild it.

Better way: Softdisk G-S #47 or 48, program I (Nathan Mates) wrote called 'Rebuilder'. Deletes the desktop file, then scans the drive for all rBundles and adds them.


How do I make a 3.5" disk that boots and runs an Application?

Assuming that this (or any other program) is a ProDOS 16 or GS/OS app, the way to put it on a self-booting disk is:

1) Format disk, install GS/OS on it, with any desired extensions, etc

2a) Copy the app you want to run to the system folder of that disk, and rename it 'Start'

-OR-

2b) Copy the app you want to run to the root directory (lowest level) of the disk, and make sure its filename ends in ".SYS16", renaming it if necessary. If you do this, delete any 'Start' program in the system folder.

This assumes that the program is small enough to fit on that disk; if space it tight, you may want to consult either http://www.visi.com/~nathan/a2/faq/mini.601.html and/or http://www.visi.com/~nathan/a2/faq/sys6files.html for lists of what files you might be able to remove.


What's the difference between 2:1 and 4:1 3.5" formatting?

These two ratios are possible interleave factors for 3.5" disks. Unidisks 3.5"s maximum speed is at the 4:1 interleave factor; if 2:1 disks are inserted in them, a lot of time will be wasted while the disk blows revolutions reading sequential sectors. Apple 3.5" drives best speed is at 2:1; 4:1 disks in them can be accessed slightly slower than 2:1, but not anywhere near as bad as 2:1 disks in Unidisk drives. Thus, if you don't have Unidisk drives, 2:1 should be selected, but if you're using a mix of drives or Unidisks, 4:1 is the optimal speed.


What do I do with icon files for the Finder, and how can I customize how they appear?

Under System 6.0, each volume you have online can (and the Finder will occasionally auto-add this) have a folder named 'Icons' in the root directory. Applications with separate icons files (as identified by a Finder 'Get Info') can have that icons file copied to the Icons folder of that partition. For example, the application /Games1/OneArmBattle/OneArmBattle should have its icon file copied to /Games1/Icons/ . Most icons files are simply cute fluff, and are not needed to run things correctly. A lot of files may also slow down loading of the Finder, as it must reload all icons files each time.

The 'FType.Apple' file installed to the Icons folder of the boot disk along with the rest of the System Software is a required file for the Finder, GS Shrinkit, and possibly other applications. Do not mess with it; it does not contain any icons, but the text descriptions of file types you can see from the Finder.

If you want to make your own icons, or point them at various applications, the best way to do this is to make up a custom icon for the filetype, and set the icon application path to the application you want to run. IconED 2.0 is a good icon editor, and is available from ftp://apple2.caltech.edu/pub/apple2/utils/. Once your icon file is created, it should be saved in an Icons folder on one of your disks, preferably the boot volume. As the first match of an icon is used, you may want to do a directory sort to move your custom file to the top of the Icons folder or elsewhere if things are matching oddly.


Resources for the Apple II

Apple II Groups

http://www.a2central.com http://www.apple2.org


Hardware and Software Vendors

http://gse-reactive.com - Apple II Hardware

http://apple2.info - Focus Hard Drive Controller - Apple IIgs 8 MB Cards - Apple II Slot expansion chassis

The Byte Works products are available at http://www.syndicomm.com. Apple IIGS assemblers, compilers, and utility programs such as a spreadsheet and a morphing program. They are also one of the few sources for Apple II books full of technical and programming information.

10.3 Fun hardware add-ons

///SSH Systeme, http://users.ids.net/~kerwood/shh.html (Write to: SHH SYSTEME, Dipl. Ing. Joachim Lange, Bergstrasse 95, 82131 Stockdorf, Germany) is selling several cards for the Apple II, allowing you to connect IDE drive(s), PC Floppy drives, or expand a Transwarp GS's cache. Contact jlange@tasha.muc.de.


Periodicals & Books

Juiced.GS = http://www.juiced.gs - Published by Ken Gagne

Misc Resources

--- End Part 4 of 4

Content is available under Creative Commons Attribution-NonCommercial-ShareAlike unless otherwise noted.
Powered by MediaWiki